Windows 8 and 8.1 Forums

Bsod: Page_fault_in_nonpaged_area

  1. #1

    Posts : 4
    Windows 8

    Bsod: Page_fault_in_nonpaged_area


    I followed the instructions for the dump file. It's attached here.

    It's only happened a few times...I thought I had fixed it last night by removing a gigabyte mobo ON/OFF Charge tool but it happened again today.

    I'm on a desktop so I am using my keyboard/mouse and the logitech t650 touchpad (T650 Wireless Rechargeable Touchpad for Windows 8 - Logitech) if that makes a difference.

    My mobo:
    Gigabyte Z68X-UD3H-B3 Intel Z68 LGA1155

    I have 4 HDD's if that means anything:
    120GB OCZ Agility 3 SSD - Main (OS and specific programs)
    Seagate ST2000DM001-9YN164
    - 2TB HDD for storage
    Seagate ST3500630AS - 500GB storage
    Seagate ST3500630AS - 500GB storage

    The ram I'm using is:
    SAMSUNG 1X4GB, PC3-12800 DDR31600MHZ 240PIN DIMM x2

    Windows says all my drivers are up to date, and firmware for HDD's is as well, as far as I know.

    Thanks for any help.

      My System SpecsSystem Spec

  2. #2

    Posts : 634
    Windows 8.1 professional x64 + WMC

    1.Please uninstall or update your apple software
    2.Uninstall avast antivirus and use windows defender instead
    ********************************************************************************                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {fffff800000ac060, 0, fffff800338edd72, 2}
    *** WARNING: Unable to verify timestamp for aswSnx.SYS
    *** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
    Could not read faulting driver name
    Probably caused by : aswSnx.SYS ( aswSnx+20b43 )
    Followup: MachineOwner
    0: kd> !analyze -v
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Arg1: fffff800000ac060, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff800338edd72, If non-zero, the instruction address which referenced the bad memory
    Arg4: 0000000000000002, (reserved)
    Debugging Details:
    Could not read faulting driver name
    OVERLAPPED_MODULE: Address regions for 'srv2' and 'dump_iaStor.' overlap
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80033bce168
    GetUlongFromAddress: unable to read from fffff80033bce1f8
     fffff800000ac060 Nonpaged pool
    fffff800`338edd72 498b18          mov     rbx,qword ptr [r8]
    TRAP_FRAME:  fffff8800ff56770 -- (.trap 0xfffff8800ff56770)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=000001580cc60000 rbx=0000000000000000 rcx=fffff88000a5eb80
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff800338edd72 rsp=fffff8800ff56900 rbp=fffff80033b02a80
     r8=fffff800000ac060  r9=0000000000000001 r10=fffff88000a5eb80
    r11=fffff8800ff56e38 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         ov up ei pl nz na po cy
    fffff800`338edd72 498b18          mov     rbx,qword ptr [r8] ds:fffff800`000ac060=????????????????
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from fffff80033a60dac to fffff800338f3340
    fffff880`0ff56588 fffff800`33a60dac : 00000000`00000050 fffff800`000ac060 00000000`00000000 fffff880`0ff56770 : nt!KeBugCheckEx
    fffff880`0ff56590 fffff800`3392dcef : 00000000`00000000 fffff800`000ac060 fffffa80`0d64a080 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x32520
    fffff880`0ff56630 fffff800`338f0dee : 00000000`00000000 00000000`00000000 fffffa80`06800200 fffff880`0ff56770 : nt!MmAccessFault+0x54f
    fffff880`0ff56770 fffff800`338edd72 : 00000000`00000000 fffff800`33ae713e fffffa80`0d40b7f0 00000000`00000000 : nt!KiPageFault+0x16e
    fffff880`0ff56900 fffff800`33ae713e : fffffa80`0d40b7f0 00000000`00000000 fffffa80`0d649940 fffff880`0ff56c80 : nt!ExpInterlockedPopEntrySListFault
    fffff880`0ff56910 fffff800`33ce8568 : fffffa80`0c483960 fffff880`0ff56c80 00000000`00000003 00000000`53646156 : nt!ExAllocatePoolWithTag+0xfe
    fffff880`0ff569e0 fffff800`338f2353 : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`00000000 : nt!NtAllocateVirtualMemory+0x519
    fffff880`0ff56b90 fffff800`338f7530 : fffff880`0409eb43 00000000`00000000 fffff880`040b6b1d 00000000`00000010 : nt!KiSystemServiceCopyEnd+0x13
    fffff880`0ff56d98 fffff880`0409eb43 : 00000000`00000000 fffff880`040b6b1d 00000000`00000010 00000000`00000000 : nt!KiServiceLinkage
    fffff880`0ff56da0 00000000`00000000 : fffff880`040b6b1d 00000000`00000010 00000000`00000000 00000000`00003000 : aswSnx+0x20b43
    fffff880`0409eb43 ??              ???
    SYMBOL_NAME:  aswSnx+20b43
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: aswSnx
    IMAGE_NAME:  aswSnx.SYS
    FAILURE_BUCKET_ID:  AV_aswSnx+20b43
    BUCKET_ID:  AV_aswSnx+20b43
    Followup: MachineOwner
      My System SpecsSystem Spec

  3. #3

    Posts : 4
    Windows 8

    Windows defender will be good enough protection?
    I've removed it, so hopefully it is!

    All apple software is up to date (just did a check).

      My System SpecsSystem Spec

  4. #4

    Posts : 634
    Windows 8.1 professional x64 + WMC

    Yes windows defender is sufficient
      My System SpecsSystem Spec

  5. #5

    Posts : 4
    Windows 8

    Very well. I'll come back to this thread if I experience any more BSOD's.
    Thanks for the help!
      My System SpecsSystem Spec

  6. #6

    Posts : 634
    Windows 8.1 professional x64 + WMC

    If it BSOD post back the dumps
      My System SpecsSystem Spec

Bsod: Page_fault_in_nonpaged_area
Related Threads
Bsod : Page_fault_in_nonpaged_area in BSOD Crashes and Debugging
Hi, I am newbie in this forum, have some problem of BSOD. Before, I already try to search or browse the solution in this forum and I try to solve, but the BSOD always showing when I turn laptop on. Please help. System Information : windows version: Windows 8.1 Pro x64 Hardware: Sabine,...
Solved Bsod - page_fault_in_nonpaged_area in BSOD Crashes and Debugging
Hello Admin and Users, I have just bought a new MSI Computer running windows 8.1, Just on the cold start, after a few minutes of playing around, I suffered a BSOD saying page fault in nonpaged area. I try searching solution by myself but failed. I have updated all drivers, all windows update...
Bsod page_fault_in_nonpaged_area in BSOD Crashes and Debugging
Please some help , i had a few bosd in the past (driver/program issues, everything solved), now i was on youtube and .... bum BSOD , probably (i hope) is a software/driver issue , recently i installed bluestacks and frets on fire .
Solved Bsod page_fault_in_nonpaged_area in BSOD Crashes and Debugging
I was on chrome (2-3 tabs) and then ... bsod , my specs: Laptop: Samsung New Series 7 Chronos cpu: i7 3635qm mb: Intel hm76 ram: 12 gb ram 1600 mhz (4gb + 8gb) gpu: intel hd 4000 + amd radeon 8870m hdd: liteon 512gb ssd s.o : windows 8 pro 64 bit
Bsod page_fault_in_nonpaged_area in BSOD Crashes and Debugging
this gateway nv57h50u has had windows 8 on it before just did clean install last week and keeps bsod I try windows 8 pro home 64bit and 32bit seems to toss same error any help would be great ty:)
Bsod: Page_fault_in_nonpaged_area in BSOD Crashes and Debugging
Hello, yesterday I saw BSOD regarding PAGE_FAULT_IN_NONPAGED_AREA w/ BugCheck 50 when reading some fonts (I think, used WinDbgx64). I have tried to gather enough infomation about my PC using SF Diag., but there were lot of Exception messages (ran elevated). All drivers up to date (if there updates...
Bsod (PAGE_FAULT_IN_NONPAGED_AREA) in BSOD Crashes and Debugging
Hello. Since yesterday I'm having frequent BSODs with the error "PAGE_FAULT_IN_NONPAGED_AREA" a few minutes after booting. I had done some overclocking on my PC so I reseted everything and cleared the CMOS to see if the problem would be fixed, however I'm still having errors. I can boot with Safe...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook