Solved BSOD when pluging flash memory

S

Stechino

New Member
Messages
5
Hello,

W8 instalation was done successfully. All functions working properly. Even Hw manager shows that here is no problem.

Problem starts when Im trying to use my flash memory pen (they r working properly in other w8 or w7 pc).

I have three usb 2 and one usb 3 (express card). No issue when plug flash to usb3 but when Im trying to use flash stick in any of remaining three usb 2 port I getting restart of laptop (HP Probook 4320s, i5, 8GB). When Im pluging usb modem, mouse or HDD there is no any issue.

Any help please? Looks like that my usb 2 port doesnt like memory stick...
 

My Computer

System One

  • OS
    W8
    System Manufacturer/Model
    HP 4320s
    CPU
    i5
    Memory
    8G
    Graphics Card(s)
    i540
ok, here we go...
thx

problém was solved later, so I deleted a files...:thumb:
 
Last edited:

My Computer

System One

  • OS
    W8
    System Manufacturer/Model
    HP 4320s
    CPU
    i5
    Memory
    8G
    Graphics Card(s)
    i540
Code: 
********************************************************************************                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 19, {20, fffffa8009a4c740, fffffa8009a4c800, c0c0004}


Probably caused by : storport.sys ( storport!RaidCompleteRequestEx+51 )


Followup: MachineOwner
---------


2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa8009a4c740, The pool entry we were looking for within the page.
Arg3: fffffa8009a4c800, The next pool entry.
Arg4: 000000000c0c0004, (reserved)


Debugging Details:
------------------




BUGCHECK_STR:  0x19_20


POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff80322171168
GetUlongFromAddress: unable to read from fffff803221711f8
 fffffa8009a4c740 Nonpaged pool


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


PROCESS_NAME:  AHDDC2_Service


CURRENT_IRQL:  1


IRP_ADDRESS:  000000000806a289


LAST_CONTROL_TRANSFER:  from fffff8032208bb95 to fffff80321e95740


STACK_TEXT:  
fffff880`08dfa5a8 fffff803`2208bb95 : 00000000`00000019 00000000`00000020 fffffa80`09a4c740 fffffa80`09a4c800 : nt!KeBugCheckEx
fffff880`08dfa5b0 fffff803`21ecf359 : fffffa80`09a4c750 fffffa80`09a8d080 fffffa80`06b59c00 fffff803`20206f49 : nt!ExDeferredFreePool+0xfdd
fffff880`08dfa690 fffff803`21ecda1a : 00000000`0806a301 fffff880`08dfa7b0 fffff880`08ea1290 00000000`00000000 : nt!IopCompleteRequest+0x79
fffff880`08dfa760 fffff880`00a42131 : fffff880`08ea1290 00000000`00000000 fffff880`08ea1000 fffffa80`09a064a0 : nt!IopfCompleteRequest+0xa5a
fffff880`08dfa840 fffff880`00a68a84 : fffffa80`079f51a0 00000000`20206f49 00000000`00000000 fffffa80`00000000 : storport!RaidCompleteRequestEx+0x51
fffff880`08dfa910 fffff880`00a44b5d : 00000000`00000000 fffffa80`09a066c0 fffffa80`09a066c0 fffffa80`08abfe10 : storport!RaidAdapterDeviceControlIrp+0x23f14
fffff880`08dfa990 fffff803`2227a44f : fffffa80`08abfe10 fffff880`08dfacc0 fffffa80`08abffb8 fffff880`00000000 : storport!RaDriverDeviceControlIrp+0x8d
fffff880`08dfa9d0 fffff803`2227add6 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x7dd
fffff880`08dfab60 fffff803`21e94753 : fffff880`08dfac50 00000000`00000000 00000000`00000000 00000000`0262e878 : nt!NtDeviceIoControlFile+0x56
fffff880`08dfabd0 00000000`77b32ad2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0262f128 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77b32ad2




STACK_COMMAND:  kb


FOLLOWUP_IP: 
storport!RaidCompleteRequestEx+51
fffff880`00a42131 8bc7            mov     eax,edi


SYMBOL_STACK_INDEX:  4


SYMBOL_NAME:  storport!RaidCompleteRequestEx+51


FOLLOWUP_NAME:  MachineOwner


MODULE_NAME: storport


[B]IMAGE_NAME:  storport.sys[/B]


DEBUG_FLR_IMAGE_TIMESTAMP:  5010ab51


BUCKET_ID_FUNC_OFFSET:  51


FAILURE_BUCKET_ID:  0x19_20_storport!RaidCompleteRequestEx


BUCKET_ID:  0x19_20_storport!RaidCompleteRequestEx


Followup: MachineOwner
---------

Is there any specific driver for your flash memory pen?
 

My Computer

System One

  • OS
    Windows 8.1 professional x64 + WMC
    System Manufacturer/Model
    Acer Aspire 5920
    CPU
    Core 2 duo T5550
    Motherboard
    ACER CHAPALA
    Memory
    4GB DDR2
    Graphics Card(s)
    Intel GMA X3100
    Screen Resolution
    1280 X 800
    Hard Drives
    160 GB HDD
Hi, no really. I try three different memory sticks (kingston, tdk and some noname). In all cases BSOD. I can just see for one second (maybe less) like explorer open window and than blue crash. When I plug any different type of devices via usb 2.0 as hdd or mobile broadband stick there is no problem. Im using these flash memories on different pc (os) and there is no problem, just w8 stacks.
Strange that memory sticks only...

There is as well e-sata port which is working fine with external hdd, even usb 3.0 (express micro card) is working properly.
 

My Computer

System One

  • OS
    W8
    System Manufacturer/Model
    HP 4320s
    CPU
    i5
    Memory
    8G
    Graphics Card(s)
    i540
Additional information (repetition): - other devices like mobile with sd memory, mobile broadband stick with memory card, external hdd, bluetooths, etc. are working fine when they are connected to USB 2.0


So, the problem is just when I plug in any memory flash usb stick (doesn't matter if they are branded or noname, even capacity has no influence) to USB ports. BSOD and restart following this operation and I'm really sad.

Looks like that my notebook doesn't like to work with mass storage devices...

Please help me gents.
 

My Computer

System One

  • OS
    W8
    System Manufacturer/Model
    HP 4320s
    CPU
    i5
    Memory
    8G
    Graphics Card(s)
    i540
Here we go!

as there is no answer and I'm feeling like a slave of Microsoft (to be honest, it was no bug of Microsoft) so, I have to study how to debug dmp. Then I found simillar output in different dmp file as bagavan. But I was looking closely to processes.

Please refer to PROCESS_NAME: AHDDC2_Service.

Directly to topic --> AHDDC2_Service.exe Windows process - What is it?

I found that this application from Ashampoo company called HDD2 control makes my crazy! Im using a lot of products from them under W8 without problem but this one somehow maneged BSOD of W8.

After un-installation of this monitoring tool I have to say: W8 is more stable than I was thinking of.

Thank you to this forum I know how to debug (selfstudy) and I found myself what was a problem.

Finally, please dont use Ashampoo HDD2 even is supported under W8, https://www.ashampoo.com/en/usd/pin/0165/System_Utilities/Ashampoo-HDD-Control-2

Thank you, Stechino
 

My Computer

System One

  • OS
    W8
    System Manufacturer/Model
    HP 4320s
    CPU
    i5
    Memory
    8G
    Graphics Card(s)
    i540
You must log in or register to reply here.
Back
Top