Windows 8 and 8.1 Forums


BSOD error : DPC_WATCHDOG_VIOLATION. Please help!

  1. #1

    BSOD error : DPC_WATCHDOG_VIOLATION. Please help!


    Im new here and i got a problem with my just installed windows 8 Pro
    i didnt do anything at the time it happened. I also got BSODs in Windows 7. I uploaded my reports from yesterday and today. the one from 25.11.12 happened when my Dad was doing something and the one from yesterday happened when i just stared at my Windows 8. :winkey: :cry:

    Thanks in Advance
    Last edited by kevini15; 25 Nov 2012 at 06:40. Reason: missing Attachements

      My System SpecsSystem Spec

  2. #2


    Mauritius
    Posts : 545
    Windows 8.1 Pro x64


    Your Marvell Yukon Ethernet Controller driver was the cause, download & install the latest version
    Marvell - Support - Driver Downloads

    Antivirus software may also be involved, if the network driver update changes nothing then remove your Kaspersky software and see if that makes any difference.

    Additionally run a RAM Test
    RAM - Test with Memtest86+ - Windows 7 Forums
    Code:
    BugCheck 133, {0, 283, 282, 0}
    
    Unable to load image \SystemRoot\system32\DRIVERS\yk63x86.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for yk63x86.sys
    *** ERROR: Module load completed but symbols could not be loaded for yk63x86.sys
    Probably caused by : memory_corruption
    Code:
    947a3000 947e3000   yk63x86  T (no symbols)           
        Loaded symbol image file: yk63x86.sys
        Image path: \SystemRoot\system32\DRIVERS\yk63x86.sys
        Image name: yk63x86.sys
        Timestamp:        Tue Sep 25 20:45:58 2012 (5061DFC6)
        CheckSum:         00048C0A
        ImageSize:        00040000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My System SpecsSystem Spec

  3. #3


    Quote Originally Posted by yowanvista View Post
    Your Marvell Yukon Ethernet Controller driver was the cause, download & install the latest version
    Marvell - Support - Driver Downloads

    Antivirus software may also be involved, if the network driver update changes nothing then remove your Kaspersky software and see if that makes any difference.

    Additionally run a RAM Test
    RAM - Test with Memtest86+ - Windows 7 Forums
    Code:
    BugCheck 133, {0, 283, 282, 0}
    
    Unable to load image \SystemRoot\system32\DRIVERS\yk63x86.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for yk63x86.sys
    *** ERROR: Module load completed but symbols could not be loaded for yk63x86.sys
    Probably caused by : memory_corruption
    Code:
    947a3000 947e3000   yk63x86  T (no symbols)           
        Loaded symbol image file: yk63x86.sys
        Image path: \SystemRoot\system32\DRIVERS\yk63x86.sys
        Image name: yk63x86.sys
        Timestamp:        Tue Sep 25 20:45:58 2012 (5061DFC6)
        CheckSum:         00048C0A
        ImageSize:        00040000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Thanks,
    i updated my network driver but i don't know how to run that RAM check.
    i installed it on one of my USB sticks but i dont know how to run it.
      My System SpecsSystem Spec

  4. #4


    Mauritius
    Posts : 545
    Windows 8.1 Pro x64


    Quote Originally Posted by kevini15 View Post
    Quote Originally Posted by yowanvista View Post
    Your Marvell Yukon Ethernet Controller driver was the cause, download & install the latest version
    Marvell - Support - Driver Downloads

    Antivirus software may also be involved, if the network driver update changes nothing then remove your Kaspersky software and see if that makes any difference.

    Additionally run a RAM Test
    RAM - Test with Memtest86+ - Windows 7 Forums
    Code:
    BugCheck 133, {0, 283, 282, 0}
    
    Unable to load image \SystemRoot\system32\DRIVERS\yk63x86.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for yk63x86.sys
    *** ERROR: Module load completed but symbols could not be loaded for yk63x86.sys
    Probably caused by : memory_corruption
    Code:
    947a3000 947e3000   yk63x86  T (no symbols)           
        Loaded symbol image file: yk63x86.sys
        Image path: \SystemRoot\system32\DRIVERS\yk63x86.sys
        Image name: yk63x86.sys
        Timestamp:        Tue Sep 25 20:45:58 2012 (5061DFC6)
        CheckSum:         00048C0A
        ImageSize:        00040000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Thanks,
    i updated my network driver but i don't know how to run that RAM check.
    i installed it on one of my USB sticks but i dont know how to run it.
    Plug in the USB stick and reboot your computer, if Memtest does not automatically boot, go into the BIOS and set the USB stick as the first boot device. (Boot device priority on some BIOS)
      My System SpecsSystem Spec

  5. #5


    I can't find my USB in BIOS. What now? I dont have any dvds or cds at home
      My System SpecsSystem Spec

  6. #6


    I didnt ipen my BIOS but i pressed ESC and i got a boot manager. Im doing the test right now and got 30% now. Bit i got 1 error.
      My System SpecsSystem Spec

  7. #7


    Posts : 197
    Win 8 Enterprise RTM


    1 error is unacceptable!
    You need to start changing your hardware, such as testing which modules and/or slots are working properly (together).

    RAM - Test with Memtest86+ - Windows 7 Forums
      My System SpecsSystem Spec

  8. #8


    Quote Originally Posted by jmv2009 View Post
    1 error is unacceptable!
    You need to start changing your hardware, such as testing which modules and/or slots are working properly (together).

    RAM - Test with Memtest86+ - Windows 7 Forums
    if something is broken do i need to buy that hardware or just buy a whole new Laptop. which would be better?
      My System SpecsSystem Spec

  9. #9


    Posts : 197
    Win 8 Enterprise RTM


    Not so fast. Consider whether your system is under warranty.
    If you can't use warranty, try removing all but one of the memory modules, and see whether your system is stable then. Don't forget to ground yourself to the system, and remove power and battery.

    http://tim.id.au/laptops/samsung/samsung%20r510.pdf


    You very likely do not need a new laptop. Very likely one of your modules is faulty, and you can run with less memory. Alternatively, you can buy more memory. Possibly up to 8 gb (not guaranteed to work) if you switch to the 64-bit OS. Samsung R Series R510 Laptop RAM Memory Upgrade
    Your core2duo will fly!

    But let's not get ahead of yourself and see if we can get you a rock solid system.
      My System SpecsSystem Spec

  10. #10


    Quote Originally Posted by jmv2009 View Post
    Not so fast. Consider whether your system is under warranty.
    If you can't use warranty, try removing all but one of the memory modules, and see whether your system is stable then. Don't forget to ground yourself to the system, and remove power and battery.

    http://tim.id.au/laptops/samsung/samsung%20r510.pdf


    You very likely do not need a new laptop. Very likely one of your modules is faulty, and you can run with less memory. Alternatively, you can buy more memory. Possibly up to 8 gb (not guaranteed to work) if you switch to the 64-bit OS. Samsung R Series R510 Laptop RAM Memory Upgrade
    Your core2duo will fly!

    But let's not get ahead of yourself and see if we can get you a rock solid system.
    Thanks!
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
BSOD error : DPC_WATCHDOG_VIOLATION. Please help!
Related Threads
:eek: WhoCrashed Info System Information (local) computer name: JAMES-PC windows version: Windows 8.1 , 6.2, build: 9200 windows dir: C:\WINDOWS
BSOD - Random - Error: DPC_Watchdog_Violation in BSOD Crashes and Debugging
Hi, I am posting here to see if anyone can help me identify the culprit behind my random BSOD's that seem to spur up at random and happen at least 2-3 times a day. It started this at first on June 3rd. And from how it happens, there doesn't seem to be anything that I do that triggers the BSOD. I...
I got this brand new laptop a few days ago, and for the past 3 days I have gotten DPC_WATCHDOG_VIOLATION error 0x0000013 and I have no idea how to fix it. I do not have an SSD as I have read that this is a main cause of this error, also another thing to do with fast startup which I have turned off....
DPC_WATCHDOG_VIOLATION bsod error on windows 8 in BSOD Crashes and Debugging
Guys, i am facing critical issue on my pc due to several days, Every time i formatted my pc,then after sometime it gives a bsod error & restart then pc cant start then windows start screen loading & loading...... I updated all driver & ssd firmware but no result. I collect dmp files &...
Solved help!!!! DPC_Watchdog_violation error in BSOD Crashes and Debugging
hey all, since 2 days ago, ive keep getting an error saying "DPC Watchdog Violation" in blue screen, i dont know whats happening it just comes randomly. it freezes, then 30 secs after it goes in blue screen This is my specs: 28d2f7f14801317e29bfb39e5b4f5387.png This is my dumb files :) i...
BSOD Error - DPC_WATCHDOG_VIOLATION in BSOD Crashes and Debugging
I have Windows 8 Pro on my Dell XPS laptop. i installed in Nov 2012. It worked fine for more then a month. But now i get BSOD Error - DPC_WATCHDOG_VIOLATION very frequently. I dont know what is causing the Error. Please help me out. Its so annoying, specially when I am at middle of some...
hello all I have relatively new laptop aspire v3-571 that came originally with windows 7 and the option to upgrade to 8 and I took it when it came out and installed it. I am not sure if it is related to the issue but few days after installing 8 the system stopped responding all together after a...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook