Windows 8 and 8.1 Forums

Getting Windows 8 BSOD since I installed FX-8350

  1. #1

    Posts : 42
    Windows 8 Pro x64

    Getting Windows 8 BSOD since I installed FX-8350

    I have received a few BSOD messages since I installed my FX-8350 chip a few days ago. i have attached the messages and was wondering if one of you kind folks could help me figure out what is causing them.

    sometimes its under system load, sometimes its while idling, and the last one was while watching a tv show online.

    thanks in advance.

      My System SpecsSystem Spec

  2. #2

    Fairfield County, CT
    Posts : 348
    Windows 7 SP1

    Your reports are a code 124. In broad terms this indicates hardware. Apparently its the chip. I think that I can assume that you are into speed and OC. Well 8 is a new OS, maybe not quite ready for the speed the chip has to offer. When Vista was first previewed it experienced many hardware and software conflicts.
      My System SpecsSystem Spec

  3. #3

    Posts : 1,308
    Windows 8 enterprise x64

    you swich from a 955 to a 8350 ? I will do a fresh install and make sure to have a BIOS with the micro-code to support it. This CPU is way different than a 955, you need to do a fresh install.
      My System SpecsSystem Spec

  4. #4

    Posts : 42
    Windows 8 Pro x64

    figured as much haha but was HOPING i wouldn't have to. but since your are saying its a hardware BSOD it makes sense.... guesss i know what i'm doing this weekend! hopefully that will clear everything up...

    i may start with a current windows 7 install and see if its more "stable"
      My System SpecsSystem Spec

  5. #5

    Posts : 1,308
    Windows 8 enterprise x64

    the FX-8350 is very stable I run it at 5.0 ghz on my Chrosshair V since a week now 24/7 ( Liquid cooling of course )
      My System SpecsSystem Spec

  6. #6

    Posts : 42
    Windows 8 Pro x64

    I have an H60 in push pull and only keep it at 4.5Ghz
      My System SpecsSystem Spec

  7. #7

    Posts : 1,308
    Windows 8 enterprise x64

    well a H60 is not a EK water block, when you reach 4.8 the vcore is at 1.5 or over so you need real cooling power

    look at the fans on this rad , this is real water cooling

    Attachment 11431
      My System SpecsSystem Spec

  8. #8

    Posts : 42
    Windows 8 Pro x64

    welllllllllll i don't have that kinda budget LMAO but i am getting an h100i when it hits amazon :P
      My System SpecsSystem Spec

  9. #9

    Posts : 197
    Win 8 Enterprise RTM

    Use driver verifier

    You have overlapped modules:
    OVERLAPPED_MODULE: Address regions for 'BthEnum' and 'WUDFRd.sys' overlap
    Is that ok in the kernel?

    Check memory (memtest @ and/or memtest86+)

    Disable bluetooth.

    Loading Dump File [C:\Users\Johannes\Downloads\SF_16-11-2012\SF_16-11-2012\111612-14944-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: SRV*c:\symbols\*
    Executable search path is: 
    Windows 8 Kernel Version 9200 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9200.16424.amd64fre.win8_gdr.120926-1855
    Machine Name:
    Kernel base = 0xfffff801`4667b000 PsLoadedModuleList = 0xfffff801`46945a60
    Debug session time: Sat Nov 17 00:21:31.478 2012 (UTC + 1:00)
    System Uptime: 0 days 1:43:01.141
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Use !analyze -v to get detailed debugging information.
    BugCheck BE, {fffff880024e15a8, 80000000004e0121, fffff880015066f0, b}
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+322ef )
    Followup: MachineOwner
    3: kd> !analyze -v
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    An attempt was made to write to readonly memory.  The guilty driver is on the
    stack trace (and is typically the current instruction pointer).
    When possible, the guilty driver's name (Unicode string) is printed on
    the bugcheck screen and saved in KiBugCheckDriver.
    Arg1: fffff880024e15a8, Virtual address for the attempted write.
    Arg2: 80000000004e0121, PTE contents.
    Arg3: fffff880015066f0, (reserved)
    Arg4: 000000000000000b, (reserved)
    Debugging Details:
    OVERLAPPED_MODULE: Address regions for 'BthEnum' and 'WUDFRd.sys' overlap
    PROCESS_NAME:  System
    TAG_NOT_DEFINED_c000000f:  FFFFF8800150EFB0
    TRAP_FRAME:  fffff880015066f0 -- (.trap 0xfffff880015066f0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=0000000000000000 rcx=ffffffffffd0f268
    rdx=000000149b304cc3 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff80146724bc1 rsp=fffff88001506880 rbp=fffffa800a85a880
     r8=0000000000000001  r9=0000000000000020 r10=000001ccb2c4dd51
    r11=000000009b304cc3 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei ng nz na pe nc
    fffff801`46724bc1 49878728540000  xchg    rax,qword ptr [r15+5428h] ds:00000000`00005428=????????????????
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from fffff80146863b25 to fffff801466f5d40
    fffff880`01506508 fffff801`46863b25 : 00000000`000000be fffff880`024e15a8 80000000`004e0121 fffff880`015066f0 : nt!KeBugCheckEx
    fffff880`01506510 fffff801`46730d6f : 00000000`00000001 fffff880`024e15a8 fffff880`014e7f40 fffff801`466ebb5c : nt! ?? ::FNODOBFM::`string'+0x322ef
    fffff880`015065b0 fffff801`466f37ee : 00000000`00000001 fffff880`014e15c8 00000000`00000000 fffff880`015066f0 : nt!MmAccessFault+0x54f
    fffff880`015066f0 fffff801`46724bc1 : fffff880`014e15c8 00000000`00da7a64 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
    fffff880`01506880 fffff801`46723540 : 00000000`00000000 00060bbf`00060bbf fffff880`01506ae8 fffff880`01506af0 : nt!PpmIdleExecuteTransition+0x520
    fffff880`01506aa0 fffff801`467213cc : fffff880`014dc180 fffff880`014dc180 00000000`00000000 fffff880`014e7f40 : nt!PoIdle+0x1e0
    fffff880`01506be0 00000000`00000000 : fffff880`01507000 fffff880`01500000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x2c
    nt! ?? ::FNODOBFM::`string'+322ef
    fffff801`46863b25 cc              int     3
    SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+322ef
    FOLLOWUP_NAME:  MachineOwner
    IMAGE_NAME:  ntkrnlmp.exe
    FAILURE_BUCKET_ID:  0xBE_nt!_??_::FNODOBFM::_string_
    BUCKET_ID:  0xBE_nt!_??_::FNODOBFM::_string_
    Followup: MachineOwner
      My System SpecsSystem Spec

  10. #10

    Posts : 42
    Windows 8 Pro x64

    Just go done doing a fresh install of windows 8 and now going through driver installs. I'll post back and let ye know if that cleared it up.
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
Getting Windows 8 BSOD since I installed FX-8350
Related Threads
AMD FX-8350 4GHz Socket AM3 in Drivers & Hardware
Hi, I am looking at purchasing the AMD FX 8350 CPU and currently have the Corsair H50 cooling system. I was wondering if there is anyone on here using the same setup and how they have found the temps? And also if the H50 is capable of running the 8350 at stock speeds? Many thanks for your...
I ran the debugger and here is what the bug analysis says.. Not sure which drivers might be bad. ******************************************************************************* * * * Bugcheck...
I just installed Windows 8 on my computer around thirty minutes ago, and I'm already having BSOD issues. Any help is appreciated
This has happened three times in the last couple of days and I cant seem to figure out what's causing it. So if someone out there could look into it for me or guide me in the right direction that would be great. here is the specs of the system in question... Gateway SX2110G-UW318 Running...
BSOD on fresh installed computer in BSOD Crashes and Debugging
Hi all, Every 5-10min getting a BSOD on a fresh installed computer (Win 8 64Bit - AsRock B75 Pro3-M - 8GBDDR3 1333 GEIL Black Dragon - i3 3225 - Hitachi 500GB deskstar 7k1000c - LG GH24NS95 ) So just when i let the computer on the desktop, it will crash in 15min. When i try to do windows...
i dont really know what the problem is but i keep getting what i THINK are blue screens. one time i saw the blue screen clicking on the classic start menu program, the other 2 i did not see. i keep my pc on over night to download stuff of the internet and i wake up to see it has restarted it self....
Eight Forums Android App Eight Forums IOS App Follow us on Facebook