Windows 8 and 8.1 Forums

BSOD about 1 minute after starting

  1. #1

    brink182 Junior Member

    BSOD about 1 minute after starting


    since the windows update today i'm getting the bsod everytime i start windows.
    I upgraded from Win7 Professional 64bit to Win8 64bit.

    I would apprerciate any help.

    Thanks a lot in advance!


      My System SpecsSystem Spec

  2. #2

    brink182 Junior Member

    I think I found a solution for this problem. I deleted all services from the autostart menu besides ms and the intel stuff. After a restart bsod didn't show anymore (something like 30 minutes ago). This doesn't mean much since it could happen again anytime.

    Just thought it might help somebody.

      My System SpecsSystem Spec

  3. #3

    I've just had a look at your dumps and they are blaming USBSTOR.SYS which is a USB mass storage driver.

    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {fffff8801c957630, 0, fffff803952b518a, 0}
    *** WARNING: Unable to verify timestamp for avmaudio.sys
    *** ERROR: Module load completed but symbols could not be loaded for avmaudio.sys
    Could not read faulting driver name
    Probably caused by : USBSTOR.SYS ( USBSTOR!USBSTOR_TranslateCDBComplete+25d )
    Followup: MachineOwner
    2: kd> !analyze -v
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Arg1: fffff8801c957630, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff803952b518a, If non-zero, the instruction address which referenced the bad memory
    Arg4: 0000000000000000, (reserved)
    Debugging Details:
    Could not read faulting driver name
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80395569168
    GetUlongFromAddress: unable to read from fffff803955691f8
     fffff8801c957630 Nonpaged pool
    fffff803`952b518a f3a6            repe cmps byte ptr [rsi],byte ptr [rdi]
    PROCESS_NAME:  System
    TRAP_FRAME:  fffff88019a377a0 -- (.trap 0xfffff88019a377a0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=fffff8801c957630 rbx=0000000000000000 rcx=0000000000000004
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff803952b518a rsp=fffff88019a37938 rbp=fffffa800b407780
     r8=0000000000000004  r9=00000000000000d7 r10=fffffa800c1369c0
    r11=fffffa80078530d9 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe nc
    fffff803`952b518a f3a6            repe cmps byte ptr [rsi],byte ptr [rdi]
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from fffff803953fbd6d to fffff8039528dd40
    fffff880`19a375b8 fffff803`953fbd6d : 00000000`00000050 fffff880`1c957630 00000000`00000000 fffff880`19a377a0 : nt!KeBugCheckEx
    fffff880`19a375c0 fffff803`952c8d6f : 00000000`00000000 fffff880`1c957630 fffffa80`0c0fc380 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x3256b
    fffff880`19a37660 fffff803`9528b7ee : 00000000`00000000 00000000`00000004 00000000`00000000 fffff880`19a377a0 : nt!MmAccessFault+0x54f
    fffff880`19a377a0 fffff803`952b518a : fffffa80`07c6da50 fffffa80`07cad630 fffff880`06e9dfe1 fffffa80`07c6da50 : nt!KiPageFault+0x16e
    fffff880`19a37938 fffff880`06e9dfe1 : fffffa80`07c6da50 fffff880`06ea0148 fffffa80`0b407780 fffff880`06e9e1c8 : nt!RtlCompareMemory+0x6a
    fffff880`19a37950 fffff880`06e9f24a : fffffa80`07cad630 fffffa80`07c6d900 fffffa80`07c6da50 fffffa80`0b407780 : USBSTOR!USBSTOR_TranslateCDBComplete+0x25d
    fffff880`19a379c0 fffff803`952c5356 : 00000000`0000ffff fffffa80`0b407780 fffff880`19a37ab9 00000000`0000ffff : USBSTOR!USBSTOR_CswCompletion+0x27a
    fffff880`19a37a40 fffff880`0857776d : 00000000`00000016 fffffa80`07c6db00 fffff880`00000002 fffff880`00000032 : nt!IopfCompleteRequest+0x446
    fffff880`19a37b20 00000000`00000016 : fffffa80`07c6db00 fffff880`00000002 fffff880`00000032 00000000`0000ffff : avmaudio+0x476d
    fffff880`19a37b28 fffffa80`07c6db00 : fffff880`00000002 fffff880`00000032 00000000`0000ffff 00000000`00000001 : 0x16
    fffff880`19a37b30 fffff880`00000002 : fffff880`00000032 00000000`0000ffff 00000000`00000001 00000000`00000000 : 0xfffffa80`07c6db00
    fffff880`19a37b38 fffff880`00000032 : 00000000`0000ffff 00000000`00000001 00000000`00000000 ffffffff`ffffffff : 0xfffff880`00000002
    fffff880`19a37b40 00000000`0000ffff : 00000000`00000001 00000000`00000000 ffffffff`ffffffff fffffa80`07589008 : 0xfffff880`00000032
    fffff880`19a37b48 00000000`00000001 : 00000000`00000000 ffffffff`ffffffff fffffa80`07589008 fffff880`08576fd4 : 0xffff
    fffff880`19a37b50 00000000`00000000 : ffffffff`ffffffff fffffa80`07589008 fffff880`08576fd4 fffffa80`09f06008 : 0x1
    fffff880`06e9dfe1 483bd8          cmp     rbx,rax
    SYMBOL_NAME:  USBSTOR!USBSTOR_TranslateCDBComplete+25d
    FOLLOWUP_NAME:  MachineOwner
    Followup: MachineOwner
      My System SpecsSystem Spec

  4. #4

    brink182 Junior Member


    thanks a lot! sounds promising, since this is one of the services i disabled before it worked again.
    I will try to update and enable it again.

    thanks again,
      My System SpecsSystem Spec

BSOD about 1 minute after starting
Related Threads
BSOD after starting up PC. in BSOD Crashes and Debugging
Sometimes (not always) after turning on computer i get a BSOD. Always at a cold start up (after long time power down). memtest86 is OK
BSOD starting with games but now more often in BSOD Crashes and Debugging
The BSODs started when I was playing graphically intensive games (downloaded through Steam, such as Everquest2 or Borderlands2) every so often (Sidebar--I've crashed recently trying to play Dragon Age Origins, a game that I've played previously with no trouble at all on this computer around 2...
Hi there, Im getting the BSOD after windows has started up, and i try load up chrome or anything that connects to the net, its happening quite frequently, but there seems to be times where everything is working fine. any help is appreciated, Thanks in advance. define
When i start a game, usually wow or league, the game doesnt start. The process stays active and I cant shut it off and a couple of minutes later I get the BSOD with the message driver_power_driver_failure. This can also happen when I shut down the pc or I put it in sleep mode. This doesnt happen...
BSOD starting up pc DRIVER_POWER_STATE_FAILURE in BSOD Crashes and Debugging
Hi, I think this is my third attempt at getting this fixed. hopefully this one will be the last. I've attached my sf diagnostic let me know if you need anything more from me.
BSOD memory managemnt error starting up in BSOD Crashes and Debugging
My computer was fine one day then, today when I was just browsing the internet it crashes. The computer restarts and then tells me there was a problem, then when I log in I get nothing but a black screen but my mouse can still move around. sometimes when starting up it takes me to the page and asks...
BSOD preventing windows 8 from starting in BSOD Crashes and Debugging
Hello, I got a bsod from a bad_pool_thread, followed by my computer trying to go into automatic repair (and then hanging) whenever I try to restart it and log into windows 8. From what I've read online, the best option to fix this seems to be to reinstall Windows 8. However, I do not have a...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook