Windows 8 and 8.1 Forums

BSOD Windows 8 Pro.

  1. #1


    Posts : 6
    Windows 8 Pro

    BSOD Windows 8 Pro.


    Hi Guys, I clean installed Win 8 Pro in my desktop pc. and im getting random BSODs with Clock_Watchdog_Timeout

    I attached the file for you guys to review. Thanks in advance!

    Attachment 10473

      My System SpecsSystem Spec

  2. #2


    I think this happens when two programs are trying to run simultaneously at the same time, which would make the processor stop responding. Try running /sfc scannow to fix system files, Check to make sure you have all latest drivers. If you still get BSOD, im sure a clean reinstall would fix the problem.
      My System SpecsSystem Spec

  3. #3


    Posts : 6
    Windows 8 Pro


    Quote Originally Posted by SIL3NTKOD3R View Post
    I think this happens when two programs are trying to run simultaneously at the same time, which would make the processor stop responding. Try running /sfc scannow to fix system files, Check to make sure you have all latest drivers. If you still get BSOD, im sure a clean reinstall would fix the problem.
    SFC /scannow returned 100% good. no integrity problems.
    I've got the latest drivers for all my components.
    As I noted in my OP, my win 8 pro install is CLEAN, and thats including delete all partitions, repartitioned with win 8 boot disk, as it makes a separate system partition of 350MB (win 7 only made one for 100MB).

    Have you taken a look at the attachment? thank you very much
      My System SpecsSystem Spec

  4. #4


    Fairfield County, CT
    Posts : 348
    Windows 7 SP1


    Code:
    Microsoft (R) Windows Debugger Version 6.2.9200.16384 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_SF_02-11-2012 (1).zip\SF_02-11-2012\110212-7862-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    Mini Kernel Dump does not have process information
    Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    
    "nt" was not found in the image list.
    Debugger will attempt to load "nt" at given base 00000000`00000000.
    
    Please provide the full image name, including the extension (i.e. kernel32.dll)
    for more reliable results.Base address and size overrides can be given as
    .reload <image.ext>=<base>,<size>.
    Unable to load image nt, Win32 error 0n2
    Unable to add module at 00000000`00000000
    Debugger can not determine kernel base address
    Windows 8 Kernel Version 9200 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9200.16424.amd64fre.win8_gdr.120926-1855
    Machine Name:
    Kernel base = 0xfffff800`f227b000 PsLoadedModuleList = 0xfffff800`f2545a60
    Debug session time: Fri Nov  2 16:27:41.312 2012 (UTC - 4:00)
    System Uptime: 0 days 10:57:39.938
    
    "nt" was not found in the image list.
    Debugger will attempt to load "nt" at given base 00000000`00000000.
    
    Please provide the full image name, including the extension (i.e. kernel32.dll)
    for more reliable results.Base address and size overrides can be given as
    .reload <image.ext>=<base>,<size>.
    Unable to load image nt, Win32 error 0n2
    Unable to add module at 00000000`00000000
    Debugger can not determine kernel base address
    Loading Kernel Symbols
    
    Loading User Symbols
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 101, {19, 0, fffff8800145d180, 2}
    
    ***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.
    
    Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
    
    Followup: MachineOwner
    ---------
    Welcome

    The information from your report can not help us determine the cause of your problem. Here is the report, notice the cause of your problem

    If you have the problem again, follow these instructions. Continue to give us all reports until the problem is resolved.
    Blue Screen of Death (BSOD) Posting Instructions

    The help given to you by the fist poster was based on his/her personal observation of the problems experinced by other members and not these reports
      My System SpecsSystem Spec

  5. #5


    Posts : 6
    Windows 8 Pro


    I remember each time it BSODed, the % of the dumping process would always never finish, sometimes stuck in 40% sometimes less, waited for minutes and minutes and it would stuck.

    So I have reconfigured to create Small Memory Dump (minidump 256kb) and now waiting for it to BSOD again.

    In regards of the first helper, I did not mean to disrespect or offend, on the contrary, I thank him a lot for his input, my question at the end was to confirm if his input was based on experience or because it was indicated in the Zip file.
      My System SpecsSystem Spec

  6. #6


    Fairfield County, CT
    Posts : 348
    Windows 7 SP1


    Your words were not offensive, you merely gave the facts and asked a question. Lets try to get your computer working again, thats what is important.
      My System SpecsSystem Spec

  7. #7


    Posts : 6
    Windows 8 Pro


    So today I turn on my pc back from S3 Sleep (I always put my pc into S3 sleep). and within a minute, I got BSODed, but this time, the error is: DPC_WATCHDOG_VIOLATION

    the error collecting only went to 60% and stuck. I've attached the Zip with the info anyways, i hope it contains some clues. thank you very muchAttachment 10549
      My System SpecsSystem Spec

  8. #8


    do you have a ssd drive? Update firmware on it if u do and or run diagnostic test after for it.Also check your virtual memory and se if it is system managed by windows and has the corrrect amount.
      My System SpecsSystem Spec

  9. #9


    Posts : 6
    Windows 8 Pro


    Quote Originally Posted by purplegoop80 View Post
    do you have a ssd drive? Update firmware on it if u do and or run diagnostic test after for it.Also check your virtual memory and se if it is system managed by windows and has the corrrect amount.
    Yes, I have a 128GB Crucial RealSSD C300. I updated to latest firmware 007 before installing win 8, like a week ago.

    Did you find any problems in the reports that indicate the problem is the SSD?

    If so, that would be a easy and cheap fix (for me).
      My System SpecsSystem Spec

  10. #10


    Update drivers for that drive and yes I found a few places where the problem was the ssd drive, just google the watchdog violation.
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
BSOD Windows 8 Pro.
Related Threads
I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c. Recently uninstalled all video drivers and re installed. The bsods sometimes go away...
BSOD When playing games random Bsod messages in BSOD Crashes and Debugging
Hey I have a problem with my pc I got a few weeks ago It keeps getting the bsod and turning on and off randomly at times I use it mostly to play games and watch youtube , twitch ext. also internet can sometimes crash pointing this out Bsod can happen when playing a game and when on the web...
I have a clients Laptop (Asus X550C) running Windows 8 and the first error I had was 0xc0000034, having a look around I tried some fixes but none worked, eventually I was left with the following error: 0xc0000001. As of now I am stuck here, I have a backup of the main files the client needs but do...
Hi, I've been getting hard locks where the audio continues to work while everything else becomes unresponsive that eventually degenerate into a BSOD with a DPC_Watchdog_Violation. Having looked at some of the events, I think it's probably some kind of SSD driver issue but I wanted to see if...
Hi, my problem with my laptop is Windows 8 BlueScreen and also Restart my laptop Without display BlueScreen and sometime this happened for more than 1 time regularly. this problem is happend Sometimes more than twice a day, when i'm doing regular things like reading a .pdf or watching a movie...
Hi, i'm new to this forum and i hope you guy can help me :) So my laptop is relatively new, it's not even a month old. I guess i've been downloading a lot of stuff that caused this error. Now, i'm not a computer expert or any type of expert, so please bear with me :D Before i go on, here are...
BSOD on a cold boot! After BSOD works fine! in BSOD Crashes and Debugging
Since getting my custom built PC, I have a BSOD that occurs after about 2 minutes of getting past the welcome screen and I only have this BSOD on a cold boot. If you could please help me and give me some advice on what i should do I would be extremely grateful! I originally posted this BSOD on...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook