Hello everyone!
First of all, I'd like to apologize if this issue's been solved in another topic already, but I couldn't find anything - if such a topic exists, please feel free to post the link .
Now, onto the issue; first of all, the motherboard I am using is a Gigabyte GA-P67-UD5-B3. According to Gigabyte's website, it uses a Realtek ALC889 chip / codec. On the back of the motherboard are the usual 6x 3.5mm output / input jacks, as well as one TOSLINK digital output jack and a Coaxial digital output jack. I use the soundcard for:
1. Headphones plugged into the 3.5mm output jack
2. A/V Receiver plugged into the orange digital Coax output on the back of the motherboard (bolded as it's the source of my main issue)
Up until recently, I was a Windows 7 user - I would always download the audio drivers from Gigabyte's website and everything worked just as it was supposed to. I've now switched to Windows 8.1 Pro 64-bit. And here's where the fun started.
As usual, I downloaded the appropriate Windows 8.1 64-bit audio drivers for my motherboard straight from Gigabyte's website. The install went through without a problem, but after restarting the computer, I realised that my A/V receiver wasn't receiving any sound signal. I opened up the "Playback devices" Window, to see if the proper output was selected as default. I realised that even though I have checked "Show disabled / disconnected devices" the output option (digital coax) I was looking for wasn't listed there. However, the TOSLINK output option was there. In Windows 7, this was never a problem and they would both always show up and work as they should.
I proceeded to check out all the options I could find in the Realtek HD Audio Manager app, to no avail. Nothing I could change seemed to fix my problem. Even the application itself only recognised the TOSLINK Digital output jack, but not the Coaxial one, as it would in Windows 7.
I decided to try downloading a different set of drivers for my chip from a different website. It didn't help, the issue remained.
But while uninstalling the old drivers and booting up the PC without any Realtek Drivers installed, I realised that at that point, the Coaxial Digital Output was recognized by Windows and it worked just as it should. I wouldn't mind not having the drivers installed at all, if it wasn't for the fact that I also use the headphones quite a lot and without changing the green 3.5mm output jack setting to "Headphones" instead of the default "Front speakers" in the Realtek HD Audio Manager application, the headphones just aren't loud enough.
That means I'm now basically stuck with either:
A) Not being able to use my Coaxial digital output or
B) Listening to my headphones at a low volume level
If my post isn't clear enough, here are pictures of what I am talking about:
Picture 1: These are the options I get while the drivers are installed (the digital output seen here is the TOSLINK optical output which I have no use for)
Picture 2: These are the options I get while no official Realtek drivers are installed (both digital outputs have the same name here, but one of them is the TOSLINK Optical one and the other one is the Coaxial one)
So, that's about it. If anyone has any ideas on what I'm dealing with here, or how to resolve it, it would be greatly appreciated. I am also contacting Realtek's support on the issue as well, as I have no idea whether the fault is on Microsoft's side or Realtek's side. If anyone knows of a workaround to get more power to my headphones without the use of Realtek's HD Audio Manager application, that would pretty much solve my issue as well!
Thank you .
First of all, I'd like to apologize if this issue's been solved in another topic already, but I couldn't find anything - if such a topic exists, please feel free to post the link .
Now, onto the issue; first of all, the motherboard I am using is a Gigabyte GA-P67-UD5-B3. According to Gigabyte's website, it uses a Realtek ALC889 chip / codec. On the back of the motherboard are the usual 6x 3.5mm output / input jacks, as well as one TOSLINK digital output jack and a Coaxial digital output jack. I use the soundcard for:
1. Headphones plugged into the 3.5mm output jack
2. A/V Receiver plugged into the orange digital Coax output on the back of the motherboard (bolded as it's the source of my main issue)
Up until recently, I was a Windows 7 user - I would always download the audio drivers from Gigabyte's website and everything worked just as it was supposed to. I've now switched to Windows 8.1 Pro 64-bit. And here's where the fun started.
As usual, I downloaded the appropriate Windows 8.1 64-bit audio drivers for my motherboard straight from Gigabyte's website. The install went through without a problem, but after restarting the computer, I realised that my A/V receiver wasn't receiving any sound signal. I opened up the "Playback devices" Window, to see if the proper output was selected as default. I realised that even though I have checked "Show disabled / disconnected devices" the output option (digital coax) I was looking for wasn't listed there. However, the TOSLINK output option was there. In Windows 7, this was never a problem and they would both always show up and work as they should.
I proceeded to check out all the options I could find in the Realtek HD Audio Manager app, to no avail. Nothing I could change seemed to fix my problem. Even the application itself only recognised the TOSLINK Digital output jack, but not the Coaxial one, as it would in Windows 7.
I decided to try downloading a different set of drivers for my chip from a different website. It didn't help, the issue remained.
But while uninstalling the old drivers and booting up the PC without any Realtek Drivers installed, I realised that at that point, the Coaxial Digital Output was recognized by Windows and it worked just as it should. I wouldn't mind not having the drivers installed at all, if it wasn't for the fact that I also use the headphones quite a lot and without changing the green 3.5mm output jack setting to "Headphones" instead of the default "Front speakers" in the Realtek HD Audio Manager application, the headphones just aren't loud enough.
That means I'm now basically stuck with either:
A) Not being able to use my Coaxial digital output or
B) Listening to my headphones at a low volume level
If my post isn't clear enough, here are pictures of what I am talking about:
Picture 1: These are the options I get while the drivers are installed (the digital output seen here is the TOSLINK optical output which I have no use for)
Picture 2: These are the options I get while no official Realtek drivers are installed (both digital outputs have the same name here, but one of them is the TOSLINK Optical one and the other one is the Coaxial one)
So, that's about it. If anyone has any ideas on what I'm dealing with here, or how to resolve it, it would be greatly appreciated. I am also contacting Realtek's support on the issue as well, as I have no idea whether the fault is on Microsoft's side or Realtek's side. If anyone knows of a workaround to get more power to my headphones without the use of Realtek's HD Audio Manager application, that would pretty much solve my issue as well!
Thank you .
My Computer
System One
-
- OS
- Windows 8.1 Pro, 64 bit
- Computer type
- PC/Desktop
- System Manufacturer/Model
- Custom build
- CPU
- Intel Core i7 2600k
- Motherboard
- Gigabyte GA-P67-UD5-B3
- Memory
- Corsair Vengeance DDR3 1866 mhz
- Graphics Card(s)
- AMD R290 Sapphire Tri-X
- PSU
- Corsair HX850W