Error code 0x80070035 "The Network path was not found"

vram

Member
Member
Messages
79
I have to PC's that belong to the same homegroup. When I go to explorer, there is a delay before the other PC shows up and yet another delay when I select to browse that PC. If I close and go back I'll often get this error code and then there are time when I get the code on the first try. These PCs are running Windows 8.1 Pro and powered on 100% of the time. I noticed this nonsense while on Windows 7 as well.
 

My Computer

System One

  • OS
    Windows 10 Pro 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD Athlon II X2 260 @ 3.2GHz
    Motherboard
    Asus M4A88T-EVO
    Memory
    8GB
    Graphics Card(s)
    Asus Radeon R7 240 2GB
    Sound Card
    Realtek Integrated
    PSU
    Seasonic
I see the same types of problem with 8.1, some lag when I open the Library on Homegroup machines.

That error message is what you get when access fails but there are a million other reasons why it's failing.

These types of problems aren't easy to track down and you really need to start with the basics and work your way up.
 

My Computer

System One

  • OS
    Windows 8.1 Pro WMC
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Home built
    CPU
    Q9650 @ 4.05 GHz
    Motherboard
    Gforce 780i SLI FTW
    Memory
    8GB Gskill DDR2 1200Mhz
    Graphics Card(s)
    GTX-480
    Sound Card
    Asus D2 Xonar
    Monitor(s) Displays
    HannsG
    Screen Resolution
    1680x1050
    Hard Drives
    Gskill 120GB SSD
    PSU
    Thermal Take 1000watts
    Case
    Thermal Take Xtreme
    Cooling
    9 fans air cooled
    Keyboard
    G15 logitech
    Mouse
    G9 logitech
    Internet Speed
    50mbps
Some more info:

My main PC is connected via Cat5 to UVerse Router and HTPC is connected via Wireless. Both run 8.1 and use Kaspersky AV. I've left/created an entirely new Homegroup and continue to have the same problem. The workgroup is also set to be the same on both PCs.

Its like the PC is not keeping the connection alive and must search reconnect everytime you enter explorer.

Update: I went into Control Panel -> Credential Manager -> Windows Credentials and replaced the Homegroup credentials with the username/password for that PC. As of now, its working and the connection is persistent. I don't think this is the "right" way to fix this problem as the Homegroup should just work, but its working nonetheless.
 

My Computer

System One

  • OS
    Windows 10 Pro 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD Athlon II X2 260 @ 3.2GHz
    Motherboard
    Asus M4A88T-EVO
    Memory
    8GB
    Graphics Card(s)
    Asus Radeon R7 240 2GB
    Sound Card
    Realtek Integrated
    PSU
    Seasonic
Some more info:

My main PC is connected via Cat5 to UVerse Router and HTPC is connected via Wireless. Both run 8.1 and use Kaspersky AV. I've left/created an entirely new Homegroup and continue to have the same problem. The workgroup is also set to be the same on both PCs.

Its like the PC is not keeping the connection alive and must search reconnect everytime you enter explorer.

Update: I went into Control Panel -> Credential Manager -> Windows Credentials and replaced the Homegroup credentials with the username/password for that PC. As of now, its working and the connection is persistent. I don't think this is the "right" way to fix this problem as the Homegroup should just work, but its working nonetheless.

So you removed or edited? the Homegroup credentials and just added the sign in password and User name. I've never had this problem with Homegroups before very strange. Does access to the Library's still work?

I'm thinking that somehow Kapersky is causing this problem to occur. I haven't seen any problems quite like the ones you are describing.
 

My Computer

System One

  • OS
    Windows 8.1 Pro WMC
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Home built
    CPU
    Q9650 @ 4.05 GHz
    Motherboard
    Gforce 780i SLI FTW
    Memory
    8GB Gskill DDR2 1200Mhz
    Graphics Card(s)
    GTX-480
    Sound Card
    Asus D2 Xonar
    Monitor(s) Displays
    HannsG
    Screen Resolution
    1680x1050
    Hard Drives
    Gskill 120GB SSD
    PSU
    Thermal Take 1000watts
    Case
    Thermal Take Xtreme
    Cooling
    9 fans air cooled
    Keyboard
    G15 logitech
    Mouse
    G9 logitech
    Internet Speed
    50mbps
Yes, I've often ran into little problems that seemed to have no explanation until Kaspersky gets removed. I do hate their software sometimes, but you really can't beat it in terms of protection. For the record though, I am running the Antivirus only variant and not the Security Suite (Firewall, etc).

As for the Homegroup creds, once I added the local user account info for the HTPC, the Homegroup creds vanished. I have full access to the main account on that PC as well as Public resources.

I got the idea from here:

Error code: 0x80070035 The network path was not found
 

My Computer

System One

  • OS
    Windows 10 Pro 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD Athlon II X2 260 @ 3.2GHz
    Motherboard
    Asus M4A88T-EVO
    Memory
    8GB
    Graphics Card(s)
    Asus Radeon R7 240 2GB
    Sound Card
    Realtek Integrated
    PSU
    Seasonic
Yes, I've often ran into little problems that seemed to have no explanation until Kaspersky gets removed. I do hate their software sometimes, but you really can't beat it in terms of protection. For the record though, I am running the Antivirus only variant and not the Security Suite (Firewall, etc).

As for the Homegroup creds, once I added the local user account info for the HTPC, the Homegroup creds vanished. I have full access to the main account on that PC as well as Public resources.

I got the idea from here:

Error code: 0x80070035 The network path was not found

Yes that entire thread was really about working around the problems that Kaspersky created. I'm pretty sure there is a way to configure Kaspersky for Homegroups to work as designed.

Most likely just creating the Homegroup before installing Kaspersky would fix most of these problems as the proper rules to allow for Homegroup access would be created right from the start
 

My Computer

System One

  • OS
    Windows 8.1 Pro WMC
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Home built
    CPU
    Q9650 @ 4.05 GHz
    Motherboard
    Gforce 780i SLI FTW
    Memory
    8GB Gskill DDR2 1200Mhz
    Graphics Card(s)
    GTX-480
    Sound Card
    Asus D2 Xonar
    Monitor(s) Displays
    HannsG
    Screen Resolution
    1680x1050
    Hard Drives
    Gskill 120GB SSD
    PSU
    Thermal Take 1000watts
    Case
    Thermal Take Xtreme
    Cooling
    9 fans air cooled
    Keyboard
    G15 logitech
    Mouse
    G9 logitech
    Internet Speed
    50mbps
Yes, I've often ran into little problems that seemed to have no explanation until Kaspersky gets removed. I do hate their software sometimes, but you really can't beat it in terms of protection. For the record though, I am running the Antivirus only variant and not the Security Suite (Firewall, etc).

As for the Homegroup creds, once I added the local user account info for the HTPC, the Homegroup creds vanished. I have full access to the main account on that PC as well as Public resources.

I got the idea from here:

Error code: 0x80070035 The network path was not found

Yes that entire thread was really about working around the problems that Kaspersky created. I'm pretty sure there is a way to configure Kaspersky for Homegroups to work as designed.

Most likely just creating the Homegroup before installing Kaspersky would fix most of these problems as the proper rules to allow for Homegroup access would be created right from the start

But plain 'ol Kaspersky Antivirus shouldn't be interfering with networking. If I was using their internet security suite, which includes their firewall, I could maybe understand.
 

My Computer

System One

  • OS
    Windows 10 Pro 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD Athlon II X2 260 @ 3.2GHz
    Motherboard
    Asus M4A88T-EVO
    Memory
    8GB
    Graphics Card(s)
    Asus Radeon R7 240 2GB
    Sound Card
    Realtek Integrated
    PSU
    Seasonic
Even without the firewall it can still cause problems, trust me on this as I've seen it many times. The problem may not even show up with the 2013 versions of Kaspersky but that thread was talking about 2010 versions.

Windows has no such problems with Homegroup credentials but it's great that you found a work around for the problem and I will remember to use that work around in the future.
 

My Computer

System One

  • OS
    Windows 8.1 Pro WMC
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Home built
    CPU
    Q9650 @ 4.05 GHz
    Motherboard
    Gforce 780i SLI FTW
    Memory
    8GB Gskill DDR2 1200Mhz
    Graphics Card(s)
    GTX-480
    Sound Card
    Asus D2 Xonar
    Monitor(s) Displays
    HannsG
    Screen Resolution
    1680x1050
    Hard Drives
    Gskill 120GB SSD
    PSU
    Thermal Take 1000watts
    Case
    Thermal Take Xtreme
    Cooling
    9 fans air cooled
    Keyboard
    G15 logitech
    Mouse
    G9 logitech
    Internet Speed
    50mbps
I'm having this problem with a Windows 8 Professional computer, and a Windows 7 Ultimate computer. I have another Windows 7 Ultimate computer that networks with both of these two, but they don't talk to each other. I have checked all of the network settings and the NetBIOS configurations as well.

So, what do you think? I'm not sure what else to try, but this feature is necessary for what I do.
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Build
    CPU
    2.90 gigahertz AMD A8-3850 APU with Radeon HD Graphics
    Motherboard
    BIOSTAR Group A55MH
    Memory
    11754 Megabytes Usable Installed Memory
    Graphics Card(s)
    AMD Radeon HD 6550D [Display adapter]
    Sound Card
    AMD High Definition Audio Device; VIA High Definition Audio; WsAudio_Device
    Monitor(s) Displays
    ViewSonic VX2025wm
    Screen Resolution
    1680 X 1050
    Hard Drives
    Seagate Portable USB Device [Hard drive] (500.11 GB) -- drive 4,
    ST3160815AS [Hard drive] (160.04 GB) -- drive 3,
    ST500DM002-1BD142 [Hard drive] (500.11 GB) -- drive 2,
    WDC WD10EALX-009BA0 [Hard drive] (1000.20 GB) -- drive 0, WDC WD3200JS-22PDB
    Browser
    IE-11
    Antivirus
    Windows Defender
Little update. I don't use KAV anymore and the issue has continued to plague me. Guess I got lucky while troubleshooting before. Is been told that Homegroup depends on ipv6 support. Not sure my pos uverse router fully supports it. At&t won't give me a newer model. I'm when stuck with wireless G speeds. *cries
 

My Computer

System One

  • OS
    Windows 10 Pro 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD Athlon II X2 260 @ 3.2GHz
    Motherboard
    Asus M4A88T-EVO
    Memory
    8GB
    Graphics Card(s)
    Asus Radeon R7 240 2GB
    Sound Card
    Realtek Integrated
    PSU
    Seasonic
Little update. I don't use KAV anymore and the issue has continued to plague me. Guess I got lucky while troubleshooting before. Is been told that Homegroup depends on ipv6 support. Not sure my pos uverse router fully supports it. At&t won't give me a newer model. I'm when stuck with wireless G speeds. *cries

Typical AT&T! I don't fool with that DSL nonsense anymore, and I hope I never have to..., EVER again!

I only use MSSE, and Windows Defender on the Windows 8 system. And like I said, I can access both computers from my primary, and both computers will access the primary. But they just won't connect to each other. KRAZEE!!!

Where is Brink? He probably has a tutorial that will fix it right up!:think:
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Build
    CPU
    2.90 gigahertz AMD A8-3850 APU with Radeon HD Graphics
    Motherboard
    BIOSTAR Group A55MH
    Memory
    11754 Megabytes Usable Installed Memory
    Graphics Card(s)
    AMD Radeon HD 6550D [Display adapter]
    Sound Card
    AMD High Definition Audio Device; VIA High Definition Audio; WsAudio_Device
    Monitor(s) Displays
    ViewSonic VX2025wm
    Screen Resolution
    1680 X 1050
    Hard Drives
    Seagate Portable USB Device [Hard drive] (500.11 GB) -- drive 4,
    ST3160815AS [Hard drive] (160.04 GB) -- drive 3,
    ST500DM002-1BD142 [Hard drive] (500.11 GB) -- drive 2,
    WDC WD10EALX-009BA0 [Hard drive] (1000.20 GB) -- drive 0, WDC WD3200JS-22PDB
    Browser
    IE-11
    Antivirus
    Windows Defender
I have this problem too with a notebook and tablet both running win 8.1 and both on the same network. They keep failing to connect within the homegroup - really frustrating!
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    Laptop
I should have mentioned that they do connect via the homegroup regularly, but the connection is intermittent and not stable, both are connected via wifi.
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    Laptop
Has anyone ever found a workaround to this problem? I'm still having trouble and now a friend of mine has the same problem. No solution I've found on the net works. I've reset Winsock, TCP/IP, deleted service profiles, joined/unjoined Homegroup, deleted/recreated Homegroup, sfc/scannow, DISM.... and nothing. The only thing I haven't tried is turning off Homegroup and using traditional usernames/passwords.

This seems like a widespread problem based on the number of hits you get when searching. I can't believe there is no fix for this by now!
 

My Computer

System One

  • OS
    Windows 10 Pro 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD Athlon II X2 260 @ 3.2GHz
    Motherboard
    Asus M4A88T-EVO
    Memory
    8GB
    Graphics Card(s)
    Asus Radeon R7 240 2GB
    Sound Card
    Realtek Integrated
    PSU
    Seasonic
I just use traditional measures. It's a pain, but if I need to connect, I need to connect!
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Build
    CPU
    2.90 gigahertz AMD A8-3850 APU with Radeon HD Graphics
    Motherboard
    BIOSTAR Group A55MH
    Memory
    11754 Megabytes Usable Installed Memory
    Graphics Card(s)
    AMD Radeon HD 6550D [Display adapter]
    Sound Card
    AMD High Definition Audio Device; VIA High Definition Audio; WsAudio_Device
    Monitor(s) Displays
    ViewSonic VX2025wm
    Screen Resolution
    1680 X 1050
    Hard Drives
    Seagate Portable USB Device [Hard drive] (500.11 GB) -- drive 4,
    ST3160815AS [Hard drive] (160.04 GB) -- drive 3,
    ST500DM002-1BD142 [Hard drive] (500.11 GB) -- drive 2,
    WDC WD10EALX-009BA0 [Hard drive] (1000.20 GB) -- drive 0, WDC WD3200JS-22PDB
    Browser
    IE-11
    Antivirus
    Windows Defender
Medion NAS-SERVER issue solved. Culprit: Bullguard.

Hi guys,
Just a heads up for others in same situation.

I have a 2 TB Medion NAS - about 2-3 years old. served me flawlessly. Been lazy backing up for 6 months, now with Win 10 coming up, I thought better safe than sorry... ok, worked like a charm. Not just once, but twice.

Two days ago I then got the 0x80070035 error... reading through this and many other forums, saving myself a complete shave of my head from pulling out my hair in frustration and VERY nearly tossing the darned thing out the window. I finally tried this:

When trying to map my backup share, it asked me for \\servername\sharename - and a password. Which I gave it, a gazillion times. After sickeningly many resets of server, reboots, shaving down users to one, lord knows what else, I had given up.
Just to mock myself even further, I tried entering my username and password for my laptop.

It worked. Instantly.Don't ask me why, I am absolutely clueless. I am now frantically running yet another full backup, feeling utterly stupid. Also p***** off at the crappy software asking me for credentials, even giving an EXAMPLE of how to type it in... oh well. It worked. For now. All is well. I'll see this backup through, and go dream about anything BUT nas-ty servers. It is worth a try!

EDIT:

Minutes after posting this thread late last night, I got an alert that my Bullguard suite wasn't running. Simple, since I had turned it off a while earlier trying to solve this. Backup was still running, set to shut down machine when finished.
Turned on Bullguard - which promptly disconnected the mapped drive, foiled the backup, and sent me back to square one. But now I knew why... went to bed and dreamt of off-grid unicorns and disconnected rainbows, and now, clear headed and tanked with caffeine, I allowed the domain "192.168.1.10" in the Bullguard firewall.
It opened instantly, using my pc account login credentials. So... it just may have been that blasted firewall all the time blocking. *doh*
Just thinking... why the f*** does a firewall interfere with one user/admin (me) and one shared disk (nas) on my own, Fort Knox-like secure, private, internal network? Especially since it had already been working flawlessly and hassle free for several years? And what business is it of theirs what my personal logon credentials are to my laptop??? Why didn't they just ask for my banking details, shoe size etc etc as well? WTF?
Sent a polite, albeit insisting ticket to Bullguard CS. They clearly have updated the firewall rules... but forgot to mention that in the release notes.
If I get any usable reply, I'll post it here.
Cheers!
 
Last edited:

My Computer

System One

  • OS
    Win 8.1 Pro
Back
Top