Installing Windows 8 using custom install.wim, key in BIOS

Hello,

I have to return a bunch of Samsung tablets to the factory default image to be on-sold but I'm running into trouble.

I made an image using CloneZilla which works except pressing F4 on startup to restore the factory image doesn't work. I spent a couple of days trying to get that to work but gave up.

I got the install.wim file from the recovery partition so I tried using a Windows VL ISO, used rufus to make a bootable USB and replaced the default install.wim from a Windows ISO with the factory image wim but got the error below. I've done this in the past with Windows 7 and it worked a treat, I guess not with Windows 8/BIOS product key.

The product key entered does not match any of the Windows images available for installation. Enter a different product key
This pops up before entering a product key. I'm assuming it's using the BIOS key.

I figued it might not like the VL ISO so then I tried an ISO downloaded using the Windows 8 media tool but I have to enter in a key, I'm not able to skip it. Not an option. I'm not even sure if this will work with a .wim file rather than a .esd file?

I used ShowKeyPlus to get the BIOS key type and it was

Win 8 RTM Core OEM: DM

I tried creating an EI.cfg file

[EditionID]
Core
[Channel]
OEM
[VL]
0

but got this error:

Windows cannot display the images available for installation

I'm not sure what else to try. The searching I've done has been people wanting to bypass the BIOS key by creating a PID.txt file and using an OEM key. I actually want to use the BIOS key. Is this even possible? Maybe I need an Win 8 RTM Core OEM: DM ISO?

thanks

You need to use WindowsRE to apply the Factory Image...

KYHI said:

You need to use WindowsRE to apply the Factory Image...

Click to expand...

Thanks KYHI

I'm not overly familiar with WindowsRE. Is that part of MS DART/ERD?

How would I get a copy of it?

download and extract Recovery 8.1.zip > https://www.dropbox.com/s/ge2119kb3lb8e65/RECOVERY 8.1.zip?dl=0
copy the contents of the folder to a fat32 formatted USB ( the zip is the bootable x64 WinPE files and the 3 files required for use with WinRE)

Mount the > Factory Install.wim
And search for winre.wim (windows\system32\recovery\winre.wim)

copy that winre.wim into the sources folder of the USB and then rename winre.wim to boot.wim

unmounts the factory install.wim..

then determine the size on the factory install.wim > if over 4GB you will have to use DISM to split the factory install.wim into install.swm(s)

Dism /Split-Image /ImageFile:\install.wim /swmfile:L:\Sources\install.swm /FileSize:3800

D:\install.wim = the location of the factory install.wim
L:\Sources\install.swm = the USB Drive letter\sources\install.swm

Now within that USB sources folder there is a > $PBR_Diskpart.txt

that file will determine the partition sizes -
you can change the values in MB's to suit your needs...

once you have the winre.wim - renamed to boot.wim in the USB\Sources Folder
and you have the install.swm.(s) in the USB\sources
And you have the partition sizes set to your requirements in $PBR_Diskpart.txt
( Should only need to adjust Recovery Partition Size so as to have enough space for the install.swm(s) + 50MB )

Boot from that USB and reset the PC...

Recovery will reset the partition sizes, write the factory install.wim to the OS partition, Copy with files needed for WinRE, write the recovery image and register the Windows Refresh/Reset Recovery options...
And it should use (find) the BIOS Activation Key to validate the windows installation..

Nice thanks for that.

It works if there's a recovery partition on the tablet SSD, but doesn't work if the disk has been cleaned using diskpart. The error is 'Unable to reset your PC a required drive partition is missing'.

Am I doing something wrong or this is expected behaviour?

Thanks again for your help.

That recovery media should work just fine on a clean drive... As it is Bare Metal Reset Recovery Media...
Meaning it will create all the partitions needed, including the recovery image partition..

But you have to make sure you have adjusted the recovery image partition (5) size correctly in the PBR_Diskpart,txt file

As to how the process works >
the drive is cleaned (reset partitions option, selected) the install.swm(s) are copied the recovery image partition
The install.swm(s) are then applied to the OS partition..
The Boot.wim is copied to the WindowsRE partition as winRE,wim
then the recovery partitions are registered within the Windows OS..

Yeah that's how thought it would've worked.

The recovery partition size of the original disk is 12GB so I added shrinkvolume=12000 (the size of the original recovery partition) to recovery partition 5, is this what I needed to do? I tried it but got the same unable to find partition error. Because shrinkvolume= it wasn't already there I didn't want to mess with it and just tried to restore using the defaults. I've also tried setting it to 40000 just as something to try, no luck either.

I found this sample diskpart script and it's the same as $PBR_Diskpart.txt
https://technet.microsoft.com/en-us/library/hh825686.aspx#RecommendedConfiguration

The comments mention to adjust partition 4 so it's large enough for the recovery image and not partition 5, am I missing something there? I tried adjusting partition 4 and 5 anyway but got the missing partition error.

When are you asked to reset the partitions, is that after you select the OS?

At the moment after the USB boots:

- select language
- Troubleshoot
- Reset your PC
- Here's what will happen.. > Next

Then the Unable to find partition error pops up, nothing about resetting partitions.

There's nothing I have to tweak in $PBR_ResetConfig.xml? Doesn't look like there is.

12GB=12288MB. 12x1024

12000 should cover it though, the install.wim (before shrinking) is less than 7GB.