Dreaded OEM Clean Install

Pelmore

New Member
Messages
6
I recently purchased a MSI GT70 laptop that came preinstalled with Windows 8. Rather than try and uninstall all the bloatware, I was planning on just doing a clean install. Little did I know that Microsoft had changed the game when it comes to authentication on W8 with the bios linked product keys.

The W8 usb drive that I used previously to install W8 on other computers does not work, I believe that is due to it recognizing it as a RETAIL version trying to be installed on an OEM system. Searching around, it seemed other people had success with using an .ISO from TechNet or MSDN and the installation automatically pulling the product key information. The .iso I used was sourced from the Microsoft store download.

After booting to the disk, I received this error: The product key entered does not match any of the Windows images available for installation. Enter a different product key.

I tried manually adding the PID.txt file with the product key I pulled from pkeyui (cross checked with showkey.vbs and RWEverything) but that resulted in the same error. For this notebook, the product key and MSDM are identical, whereas I read other people were finding two different product keys. One nestled deep in the bios and the other being what you see when you run Belarc Advisor etc.

Burning the .iso to a DVD and then starting the setup inside a session of W8 resulted in a different error: this product key cannot be used to install a retail version

So once again back to the issue of using a retail .iso with an OEM product key to try and do a clean install. As far as I know you can't download an "oem .iso" but I'm not sure how to get the retail .iso to play nicely with the product key I have.

So exactly how does one do a clean install of an OEM windows 8 build on a laptop that comes preinstalled with windows 8? If I can't sort this out, I may be stuck with rooting out the bloatware. :shock:
 

My Computer

System One

  • OS
    W8
Try making an ei.efg file under sources directory using notepad, contains this texts:

[EditionID]
Professional
[Channel]
OEM
[VL]
0

Substitute Professional to your edition (Professional = Pro, Core = Standard, CoreSingleLanguage, CoreMultilanguage).
 

My Computer

System One

  • OS
    Windows 10 Pro x64
    Computer type
    Laptop
    System Manufacturer/Model
    Lenovo Y520
    CPU
    Intel Core i5 7300HQ
    Motherboard
    OEM Lenovo
    Memory
    4GB DDR4-2400
    Graphics Card(s)
    NVIDIA GeForce GTX 1050
    Sound Card
    Realtek HD
    Monitor(s) Displays
    1 (2)
    Screen Resolution
    1920x1080
    Hard Drives
    Seagate 1TB 5400 RPM
    Keyboard
    OEM Lenovo
    Mouse
    Logitech G502 Proteus Core
    Internet Speed
    100 Mbps
    Browser
    Google Chrome
    Other Info
    PC:

    AMD Athlon X4 760K
    8GB DDR3-1866
    AMD Radeon RX 460
    Seagate 500 GB 7200 RPM
Try making an ei.efg file under sources directory using notepad, contains this texts:

[EditionID]
Professional
[Channel]
OEM
[VL]
0

Substitute Professional to your edition (Professional = Pro, Core = Standard, CoreSingleLanguage, CoreMultilanguage).

I created the ei.efg text file and placed it in the source directory with these values:

[EditionID]
Core
[Channel]
OEM
[VL]
0

Booting to USB resulted in the same error "product key does not match" as before. Not sure if it matters, but I did remove the PID.txt file from the source directory. I don't believe it needs both the ei.efg and PID.txt, right?
 

My Computer

System One

  • OS
    W8
No need for ei.cfg, delete it and just try to install with a generic key. Find one for your version there :
MSDN Subscriber Downloads

Once installed and if you're connected to internet the activation should be automatic (it will get your product key directly from the bios). Retail does work with oem embedded keys, I've done it . Just make sure that the version you install corresponds to the one you had (core / single language / N / Pro / etc...) or it just won't work (I hope you ran slmgr /dlv beforehand on your old system for that tho or you'll have to trust your luck)
 

My Computer

System One

  • OS
    Windows 8.1 (x64)
    Computer type
    PC/Desktop
Yes this can be done, you just need to use a generic key to start the install, after your installed then activate with your key that you extracted from the BIOS

Check out the Guides in this http://www.eightforums.com/installa...tail-windows-8-1-windows-8-product-key-2.html
Windows 8.1 Single Language Y9NXP-XT8MV-PT9TG-97CT3-9D6TC
Windows 8.1 Core 334NH-RXG76-64THK-C7CKG-D3VPT
Windows 8.1 Pro XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB
 

My Computer

System One

  • OS
    Windows 8.1 Pro MC
    Computer type
    Laptop
    System Manufacturer/Model
    Asus G75VW / Z97 Pro
    CPU
    Intel Core i7-3610QM / I7-4790K
    Motherboard
    Z97 Pro
    Memory
    16 GB Hyundai HTM315156CFR8C-PB PC3-12800
    Graphics Card(s)
    nVIDIA GeForce GTX 670M (GF114M)
    Sound Card
    VIA 6.0.10.1600
    Screen Resolution
    1080
    Hard Drives
    Samsung 850 Pro 256, Samsung 850 Pro 1TB
    Internet Speed
    30 down 3 up
    Browser
    Explorer 11
    Antivirus
    NIS and Malwarebytes
The TechNet ISO's are listed as being Retail. I've used those ISO's to clean install Windows 8.0 on my ASUS laptop that has an OEM embedded key. My embedded key is for 8 core and that is what gets installed. I am not prompted for a product key and activation in done automatically online. Here's the deal with reading the embedded key. Windows stores the currently in use key in the registry. That's where a lot of these key finding utilities get it from. That's fine if you have never upgraded your factory OEM install. If you haven't the registry stored key will match the embedded key that was read out during the install. However, if you use the Add Features option to upgrade to 8 Pro or add Media Center to 8 Pro, the key stored in the registry will be the 8 Pro key or the Media Center key. It's the last one entered. That's where some people have gotten confused and gotten the wrong key. rweverything is one utility that will read the actual code stored in the BIOS.

I'd have to do some searching but I do believe some people ran into issues if the factory installed version was Windows 8 Single Language. Finding the matching install media was an issue.
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
Try making an ei.efg file under sources directory using notepad, contains this texts:

[EditionID]
Professional
[Channel]
OEM
[VL]
0

Substitute Professional to your edition (Professional = Pro, Core = Standard, CoreSingleLanguage, CoreMultilanguage).

I created the ei.efg text file and placed it in the source directory with these values:

[EditionID]
Core
[Channel]
OEM
[VL]
0

Booting to USB resulted in the same error "product key does not match" as before. Not sure if it matters, but I did remove the PID.txt file from the source directory. I don't believe it needs both the ei.efg and PID.txt, right?

The Microsoft official OEM/Retail DVD's DO NOT HAVE A PID.TXT file.

CaptureDVD.PNG

Where do you buy your DVD from?


You may like to get a DVD & license key from a good source like:

Windows Download and Shop - Microsoft Windows
 

My Computer

System One

  • OS
    ME, XP,Vista,Win7,Win8,Win8.1
    Computer type
    PC/Desktop
    Other Info
    Notebooks x 3

    Desktops x 5

    Towers x 4
Theog they are talking about the adding of an ei.cfg file, not a PID.TXT file.I see your point though as my TechNet ISO's don't have either file, they are multi edition, core and pro. The product code entered determines what version is installed. There is nothing stopping you from adding either file though to speed things up during the install or to make custom install media.
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
Theog they are talking about the adding of an ei.cfg file, not a PID.TXT file.I see your point though as my TechNet ISO's don't have either file, they are multi edition, core and pro. The product code entered determines what version is installed. There is nothing stopping you from adding either file though to speed things up during the install or to make custom install media.

"Booting to USB resulted in the same error "product key does not match" as before. Not sure if it matters, but I did remove the PID.txt file from the source directory. I don't believe it needs both the ei.efg and PID.txt, right?"
 

My Computer

System One

  • OS
    ME, XP,Vista,Win7,Win8,Win8.1
    Computer type
    PC/Desktop
    Other Info
    Notebooks x 3

    Desktops x 5

    Towers x 4
Theog they are talking about the adding of an ei.cfg file, not a PID.TXT file.I see your point though as my TechNet ISO's don't have either file, they are multi edition, core and pro. The product code entered determines what version is installed. There is nothing stopping you from adding either file though to speed things up during the install or to make custom install media.

"Booting to USB resulted in the same error "product key does not match" as before. Not sure if it matters, but I did remove the PID.txt file from the source directory. I don't believe it needs both the ei.efg and PID.txt, right?"

OK, my bad, sorry, missed that last line. The screen shot showed the ei.cfg file. :eek:
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
No need for ei.cfg, delete it and just try to install with a generic key. Find one for your version there :
MSDN Subscriber Downloads

Once installed and if you're connected to internet the activation should be automatic (it will get your product key directly from the bios). Retail does work with oem embedded keys, I've done it . Just make sure that the version you install corresponds to the one you had (core / single language / N / Pro / etc...) or it just won't work (I hope you ran slmgr /dlv beforehand on your old system for that tho or you'll have to trust your luck)

I do not have access to the MSDN downloads area, at least that's what it says when I try and download any of the .iso files. Checking slmgr /dlv indicates that I do have the Core flavor of Windows 8.

slmgrdlvedited.png

So the iso that I have been using to try and do a clean install was generated from the windows store here: Upgrade Windows with only a product key - Microsoft Windows Help After downloading the software it prompts you for a product key. If I use the OEM product key it generates an error saying, "This product key cannot be used to install a retail version of Windows 8." So I previously got around this by using the product key from my tablet that I upgraded back in December. Running slmgr / dlv on the tablet told me that it is actually the Professional Edition not core.

So that's why my .iso file isn't working, but how do I get my hands on a core iso instead? I noticed that there is a generic key that you can use for 8.1 and then use your actual key to activate. Is there a generic CORE key for 8.0 that could be used to generate the appropriate CORE iso I need and then activate with the key I have found in the bios?

Thank you everyone for the help so far. It is invaluable.
 

Attachments

  • PIDChecker.png
    PIDChecker.png
    23.8 KB · Views: 132

My Computer

System One

  • OS
    W8
So that's why my .iso file isn't working, but how do I get my hands on a core iso instead? I noticed that there is a generic key that you can use for 8.1 and then use your actual key to activate. Is there a generic CORE key for 8.0 that could be used to generate the appropriate CORE iso I need and then activate with the key I have found in the bios?

NO, you would need to buy the CORE key first.
 

My Computer

System One

  • OS
    ME, XP,Vista,Win7,Win8,Win8.1
    Computer type
    PC/Desktop
    Other Info
    Notebooks x 3

    Desktops x 5

    Towers x 4
MSDN and TechNet are subscriber only downloads. If memory serves me that download you linked to won't accept OEM keys, only Retail. I don't think the leaked generic install keys will let you download either. I haven't seen any for windows 8 anyway. I used my TechNet keys as a test, they are Retail keys. That's how I know the key determines what version you get, Core or Pro. Your stuck between a rock and a hard place. You need a Retail 8 Core product code to get the Core download. Or a full retail ISO/DVD to use as install media. One thing you can get from The MSDN site is MD5 check sums. If you can find an ISO from another source you can check the hash code to see if that ISO has been altered or modified from the original.
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
Your stuck between a rock and a hard place. You need a Retail 8 Core product code to get the Core download. Or a full retail ISO/DVD to use as install media. One thing you can get from The MSDN site is MD5 check sums. If you can find an ISO from another source you can check the hash code to see if that ISO has been altered or modified from the original.

So it seems I have 1/2 a key to two different locks. The retail ISO for W8 PRO and a key for OEM Core with no ISO. :confused:

Before I look into the MD5 check sums and comparing them to what else is available on the interweb, would it be possible to use the generic Windows 8.1 key to do a clean install with that .ISO and then activate it using the Windows 8.0 OEM key that I have?
 

My Computer

System One

  • OS
    W8
Sorry if I wasn't specific about retrieving your key...

Microsoft distributes generic keys (they are free and totally legal) for most of its software. They are used by OEMs to ease installation and aren't valid for the activation process (that's when the OS retrieves your emebedded key).

So you'll have to :
* Retrieve an .ISO for the specific version you had installed (you can confirm it with slmgr /dlv)
* You can find MS keys here : Appendix A: KMS Client Setup Keys
* If your version isn't listed here are some more : Windows ADK (scroll to the bottom, click on default product keys)
* Install Windows and give your default key during installation
* Once installed make sure you are connected to internet

If everything's done right the activation is automatic.

And yes you can do it with a windows 8.1 ISO instead but again it has to match the version for which your embedded key works.
I had to do the same as you for a clean install on my ASUS PC, it came bloated with a bunch of software that wouldn't uninstall completely(especially 2 services that have a memory leak and a registration auto run that wouldn't go even after registration). Sigh... I wonder why PC manufacturers feel the need to stuff all their PCs with all this useless crap. And of course all that would reinstall after a refresh/reset.
 

My Computer

System One

  • OS
    Windows 8.1 (x64)
    Computer type
    PC/Desktop
Your stuck between a rock and a hard place. You need a Retail 8 Core product code to get the Core download. Or a full retail ISO/DVD to use as install media. One thing you can get from The MSDN site is MD5 check sums. If you can find an ISO from another source you can check the hash code to see if that ISO has been altered or modified from the original.

So it seems I have 1/2 a key to two different locks. The retail ISO for W8 PRO and a key for OEM Core with no ISO. :confused:

Before I look into the MD5 check sums and comparing them to what else is available on the interweb, would it be possible to use the generic Windows 8.1 key to do a clean install with that .ISO and then activate it using the Windows 8.0 OEM key that I have?

Yes and no. Your still stuck with the wrong version. If your 8.0 product code is for 8 Pro your going to end up with an 8.1 Pro download that will not activate with an 8 Core key. But yes you can install with the generic key and activate with a 8.0 key. You can try downloading with the 8 Core generic key but I don't think it will work. I'd have to read though that thread again to confirm. I really should be writing this stuff down as my memory isn't what it should be some times.
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
Sorry if I wasn't specific about retrieving your key...

Microsoft distributes generic keys (they are free and totally legal) for most of its software. They are used by OEMs to ease installation and aren't valid for the activation process (that's when the OS retrieves your emebedded key).

So you'll have to :
* Retrieve an .ISO for the specific version you had installed (you can confirm it with slmgr /dlv)
* You can find MS keys here : Appendix A: KMS Client Setup Keys
* If your version isn't listed here are some more : Windows ADK (scroll to the bottom, click on default product keys)
* Install Windows and give your default key during installation
* Once installed make sure you are connected to internet

If everything's done right the activation is automatic.

There's the rub though, he doesn't have an ISO or an easy way to get one. I've bookmarked those sites though for future reference, thanks for the links.
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
Well how to retrieve an ISO is another problem entirely but not really a difficult one. Keep in mind you do have the legal right to own windows 8. If you happen to get an ISO in whatever way (hint:google), there's nothing wrong in using it (the physical download isn't what's important, your key and your right to use it is). Just make sure whatever ISO you get has matching hashes to the official MS ones (MSDN Subscriber Downloads). You can use Sigcheck from microsoft to retrieve the hash (sigcheck -h filename/directory).
 

My Computer

System One

  • OS
    Windows 8.1 (x64)
    Computer type
    PC/Desktop
Well how to retrieve an ISO is another problem entirely but not really a difficult one. Keep in mind you do have the legal right to own windows 8. If you happen to get an ISO in whatever way (hint:google), there's nothing wrong in using it (the physical download isn't what's important, your key and your right to use it is). Just make sure whatever ISO you get has matching hashes to the official MS ones (MSDN Subscriber Downloads). You can use Sigcheck from microsoft to retrieve the hash (sigcheck -h filename/directory).

I agree, I had to go that route in the past when I didn't have my MSDN subscription.
 

My Computer

System One

  • OS
    Windows 10 Education 64 Bit
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Asus
    CPU
    AMD Phenom II X4 980 Black Edition Deneb 3.7GHz
    Motherboard
    ASUS M4N68T-M V2 µATX Motherboard
    Memory
    8GB 4GBx2 Kingston PC10600 DDR3 1333 Memory
    Graphics Card(s)
    NVIDIA Geforce GT640 2 Gig DDR3 PCIe
    Sound Card
    VIA VT1708s High Definition Audio 8-channel Onboard
    Monitor(s) Displays
    22" LG E2242 1080p and 2 19" I-INC AG191D
    Screen Resolution
    1280x1024 - 1920x1080 - 1280x1024
    Hard Drives
    Crucial MX100 256 GB SSD and 500 GB WD Blue SATA
    PSU
    Thermaltake TR 620
    Case
    Power Up Black ATX Mid-Tower Case
    Cooling
    Stock heatsink fan
    Keyboard
    Logitech Wireless K350 Wave
    Mouse
    Logitech M570 Trackball and T650 TouchPad
    Internet Speed
    80 Mbps Down 30 Mbps Up
    Browser
    Internet Explorer 11
    Antivirus
    Windows Defender
    Other Info
    HP DVD1040e Lightscribe - External USB2
Back
Top