Windows 8 and 8.1 Forums


USB 3.0 Drivers for Fresco Logic

  1. #1


    Posts : 10
    Win 8.1 Pro 64 Bit

    USB 3.0 Drivers for Fresco Logic


    I reinstalled Win8 Pro on ASUS N53 SN due to some problems.
    Now I cannot find the correct drivers for USB 3.0 Root Hub. Does anyone know which driver to use? Asus website does not support N53 SN on Win8 very much. The ones I tried didn't help either.

    In the Device Manager, just above it, the information shows nothing wrong with the USB controller:
    Fresco Logic xHCI (USB3) Controller FL1000 Series: Device working properly.


    The information about the problematic driver is so:

    Fresco Logic xHCI (USB3) Root Hub

    Device Status: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
    Hardware ID: FLUSB\ROOT_HUB_FL30
    Driver Version: 3.5.93.0

      My System SpecsSystem Spec

  2. #2


    Posts : 10
    Win 8.1 Pro 64 Bit


    I found these drivers and USB 3.0 working properly now. If anyone needs:

    http://dlcdnet.asus.com/pub/ASUS/nb/..._64_Z35730.zip
      My System SpecsSystem Spec

  3. #3


    Posts : 23
    Windows 8.1 pro with Media center


    Maybe late but better b late then never. Had the same problem. Install a newer version but did not work. So i've downloaded and install this one and voilą. A very big thank you.

    Lievre
      My System SpecsSystem Spec


USB 3.0 Drivers for Fresco Logic

Similar Threads
Thread Forum
New to 8.1 Pro X64, where are all the drivers?
Does this OS include Net Framework 4? i also noticed setting up my UEFI raid config with 8.1 was much easier than with Win 7. Is their a program you guys use to check to the current drivers for your system?
Drivers & Hardware
My printer Drivers wont install: MP Drivers?? please help
Hey guys Its InferneX, I've recently changed one of my PC to Windows 8 and I'm already having a huge issue installing a printer I bought a new printer Cannon Pixma MG3100 though whenever I try to install the drivers and all the other program from the disk I get this problem that shows? 12107...
Drivers & Hardware
Drivers
I have a Konica Minolta PagePro 1350W laser printer. I had trouble finding printer drivers for Window 7 and now for Windows 8. If I recall correctly the Win 7 drivers came from Europe and I found them thru a forum. The printer EOM seems to always be behind. Anyone have any suggestions?
Drivers & Hardware
BSOD on Fresco USB 3.0 FL1000 series
Driver version of FLxHCIc.sys (Fresco Logic fl1000): 3.5.88.0 (9/21/2012) Driver version of Peripherical netr7064.sys (Ralink rt 2500): 3.1.3.0 (4/27/2010) BSOD is 0x9f_4 Downgraded to 3.5.73.0 rt2500 device was disconnected already, but windows seemed to think the device was still...
BSOD Crashes and Debugging
My logic behind Microsoft's controversial decision: Removal of Start
Hello Guys, There has been serious, heated debates and disappoint among users over Microsoft's controversial decision to remove the start button. But I though find some logics behind this, here they are: 1) Start button has been replaced by Start Screen, as simple as that, whether you like it...
General Support
Windows 8 ins't confusing, use common sense and logic
Important! Please be advised this only applies to the FX990 AMD chipset ASUS Crosshair V Formula/Thunderbolt MB Warning: ASUS and ROG will not support you if you are experiencing issues with installing drivers for Windows 8. Drivers will only be available either just before, or near to the...
Installation & Setup

Eight Forums Android App Eight Forums IOS App Follow us on Facebook