Furmark tests complete.
Had to do two tests as first one crashed after attempting to take a screenshot at 10 minute mark.Second one crashed as well due to trying to take another screenshot at the full 30 minute duration. F9 function caused this. Instead had to use PrtScn function instead to produce results. Sorry if the images are not the most effective way to present results.
Looking at the temps the max reaches 90C+, how long was it that high?
I think it was by the 4 minute mark that it had reached 90°C.Maximum temperature of 90°C+ was seen throughout the majority of the 30 minute test. I would assume that it had lasted for about 26 minutes in the test.
Please check inside the case for any dust, durt or something else that doesn't belong in there and remove it.
Inside of case has been cleaned out. As much dust removed as possible.
Run the stress test again and stop it when the temp reaches 85C+
FurMark test done.
Test duration: 30 mintutes
- At 2 mintutes = 60°C
-For 28 minutes = 67 / 68 °C
-Did not reach limit of 85°C
Let me know how it goes
Removing dust often helps enough with solving the problem.
There still seems to be a reoccurring crash - same process that happens.
Attached logs of of all recorded memory dumps. But I assume they will all just suggest the same cause.