Phase1_initialization_failed

trd3v3lop · Jan 2, 2015

Hi everybody. About 1-2 hours ago i faced with PHASE1_INITIALIZATION_FAILED bsod. Before that my laptop suddenly shut down(without warnings etc.) Than i opened it and faced with BSOD. It finished collection information and restarted. that time it stucked at windows logo. I hold down power button and shut it down. I have gone to sleeping and now i am glad my laptop is working again. I think it will happen again so i want to share it with this incredible forum. I hope you will have solution thanks

By the way it is a little bit late but still HAPPY NEW YEARS

softwaremaniac · Jan 2, 2015

Check your temperatures, your HD with HD Tune (post a screenshot of the Health tab and run Error scan), and test your RAM with Memtest for eight passes: RAM - Test with Memtest86+ - Windows 7 Help Forums

trd3v3lop · Jan 7, 2015

softwaremaniac said:
Check your temperatures, your HD with HD Tune (post a screenshot of the Health tab and run Error scan), and test your RAM with Memtest for eight passes: RAM - Test with Memtest86+ - Windows 7 Help Forums

No errors on memtest and also at Error scan.
Temperatures are usually like this. i have been testing for 2-3 days.

View attachment 56308 View attachment 56309

Mysers Briggs · Jan 7, 2015

Code:

7: kd> kn
 # Child-SP          RetAddr           Call Site
00 ffffd001`ba5bbb68 fffff802`0313f7ae nt!KeBugCheckEx
01 ffffd001`ba5bbb70 fffff802`02f019d1 nt!Phase1InitializationIoReady+0x18de
02 ffffd001`ba5bbbd0 fffff802`02b0ce70 nt!Phase1Initialization+0x39
03 ffffd001`ba5bbc00 fffff802`02b637c6 nt!PspSystemThreadStartup+0x58
04 ffffd001`ba5bbc60 00000000`00000000 nt!KiStartSystemThread+0x16
[COLOR=#800080]
//Phase 1 initialisation failed, but why?[/COLOR]

7: kd> !error ffffffffc0000189
Error code: (NTSTATUS) 0xc0000189 (3221225865) - A write operation was attempted to a volume after it was dismounted.

[COLOR=#800080]//The drive just disappeared[/COLOR]

You are getting CRC errors, not good at all. Your drive is failing, I'd recommend using Seatools DOS to double check.
CRC errors are almost always disk related.

softwaremaniac · Jan 7, 2015

I agree.

trd3v3lop · Jan 7, 2015

okay thanks for your helps :thumb:

Phase1_initialization_failed

trd3v3lop

New Member

My Computer

System One

softwaremaniac

Well-Known Member

My Computer

System One

trd3v3lop

New Member

My Computer

System One

Mysers Briggs

Member

My Computer

System One

softwaremaniac

Well-Known Member

My Computer

System One

trd3v3lop

New Member

My Computer

System One