Fatal Error - Memory Table(s)????

Hey,

Im having an issue and I am at wits end on how to fix this issue

I am currently working on a desktop and ended up formatting the HDD it was in RAID, but removed the other and switched connection to SATA...

Wiped everything off of it and loaded Windows onto it,

On EVERY boot I get the same error message

"Fatal Error - failed to locate memory table(s) to make adjustments,
press any key to continue"

I press any key and it continues to boot into the windows..

I have done some research on other forums, and end up finding the same issue

"reload windows there are some file issues"

but that's not my issue, because i CHANGED the RAM 2 times with different ram AND installed windows 4 different times

any insight or help would be greatly appreciated

thanks;

403Phaze

Even though you're not reporting BSOD's, please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): http://www.eightforums.com/bsod-cra...e-screen-death-bsod-posting-instructions.html

I suspect a BIOS problem, although hardware problems are also possible.'

At what point in the boot does this error message pop up? (before/after the Windows splash screen?)

When reinstalling Windows, did you use different restore media?

Run hardware diagnostics (particularly MemTest and Prime95): Hardware Diagnostics
As memory is tested in each of the tests (to include the hard drive - as that's where the pagefile is located), please be sure to run ALL tests.

it happens before the splash after POST, ran Memtest, and HeavyLoad, both showed no issue, changed the RAM 2x when loading different windows versions

im thinking it could be a mobo fault, but i also could be wrong