Windows 8 and 8.1 Forums

BSOD issues cont.

  1. #1

    Posts : 9
    Windows 8

    BSOD issues cont.

    I say cont. in title because I have had issues in the past.
    BSOD Random 0x000000BE nvlddmkm.sys - Page 7 - Windows 7 Support Forums
    After the beginning of November I have been BSOD free. I upgraded to Windows 8 in early December. The last couple BSOD's have occurred while playing "DungeonDefenders" (dundefgame.exe). My current guess is the problem is no longer voltage issues, which was my previous problem. I have noticed while playing Dung Def my mouse gets really laggy, and can only be fixed by unplugging/plugging it in. Razer has yet to release driver updates for Win 8 for this model. (should be out this month). Any questions let me know. I think Dave76 may just take this one up too.


      My System SpecsSystem Spec

  2. #2

    Posts : 9
    Windows 8

    Totally forgot to include attachment.
      My System SpecsSystem Spec

  3. #3

    Tropical Island Pair a Dice
    Posts : 3,030
    Windows 8.1 Pro x64/ Windows 7 Ult x64

    Hi StarrBurst.

    Can you fill in your System Specs?
    Use Speccy for the details.

    Are all the BIOS settings still the same as the last posts in Seven Forums?
    Confirm these settings:
    'DRAM Voltage Control' to 1.610v
    'CPU NB VID' to 1.300v

    Have you checked for SSD firmware update?

    Your last two crashes:
    Usual causes:  Device driver
    *** WARNING: Unable to verify timestamp for Rt630x64.sys - Realtek PCI/PCIe Adapters
    *** ERROR: Module load completed but symbols could not be loaded for Rt630x64.sys
    Probably caused by : NETIO.SYS ( NETIO!KfdClassify+a3d ) - Windows driver - Network I/O Subsystem
    LAST_CONTROL_TRANSFER:  from fffff802088567b8 to fffff802086e8040
    Usual causes:  Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
    Probably caused by : ntkrnlmp.exe ( nt!KiTimerWaitTest+81 )
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    TAG_NOT_DEFINED_c000000f:  FFFFF803C6E3EFB0
    Cannot read Exception record
    FAILURE_BUCKET_ID:  0x1E_c0000005_R_nt!KiTimerWaitTest
    Have you updated all the drivers from your motherboards support site?
    Gigabyte GA-890FXA-UD5 W8 drivers
    Be sure to install the Realtek LAN Driver v8.002.0612.2012.

    The last crash listed could be a RAM issue or driver issue.
    If you have any motherboard (Gigabyte) utilities installed, un-install them, they are known to cause instabilities.

    From your System Event Logs:
    A lot of these.
      Log Name: System
      Source: Microsoft-Windows-Kernel-Power
      Date: 2013-02-18T07:43:23.163
      Event ID: 137
      Task: N/A
      Level: Error
      Opcode: Info
      Keyword: N/A
      User: N/A
      User Name: N/A
      Computer: Zach-Desktop
    The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S5). This can result in reduced resume performance.
    First try changing the hard disk sleep time to a high number so it won't ever sleep.
    Control Panel > Power Options > Change When the Computer Sleeps > Change Advanced Power Settings >
    Expand 'Hard disk', then 'Turn off hard disk after', change time to sleep.

    If the above doesn't work, sleep crashes possibly can be stopped by disabling Hybrid Sleep.
    Control Panel > Power Options > Change When the Computer Sleeps > Change Advanced Power Settings >
    Expand 'Sleep', then 'Allow hybrid sleep', click on 'Setting' and change to 'Off'.
    Some systems are known to crash when this is turned on.

      Log Name: System
      Source: Microsoft-Windows-Kernel-Processor-Power
      Date: 2013-02-18T00:10:26.745
      Event ID: 55
      Task: N/A
      Level: Information
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      Computer: Zach-Desktop
    Processor 0 in group 0 exposes the following power management capabilities:
    Idle state type: ACPI Idle (C) States (2 state(s))
    Performance state type: ACPI Performance (P) / Throttle (T) States
    Nominal Frequency (MHz): 3200
    Maximum performance percentage: 100
    Minimum performance percentage: 25
    Minimum throttle percentage: 25
    If you are overclocking, return your BIOS to Optimized Defaults.
    This may be from CPU overheating. Have you checked the CPU core temps?
    Make sure it's not overheating again.

    Your App Events Log is showing a lot of Steam and game crashes.
    This can be caused by the issues listed above.

    Do you have an updated W8 Razor mouse driver?
    It's causing problems.
    If no new driver is available, use another mouse for testing purposes, un-install any software and drivers.
    Razor drivers are known to cause instability in Windows 7 & 8.
    RzSynapse.sys Jan 10 2011
    Last edited by Dave76; 19 Feb 2013 at 05:01.
      My System SpecsSystem Spec

  4. #4

    Posts : 9
    Windows 8

    Speecy Specs: Zach-Desktop.txt
    Those 2 voltages were correct.
    Tried to update firmware using Cruicial's m4 updater thingy. It froze computer twice. It says let it will only take a few minutes. After 10 minutes of my computer not responding on both attempts, I gave up.
    Motherboard drivers are about to be installed/reinstalled.
    I"m not overclocking.
    Will watch core temps tonight when I can have time to game. The idle temp of CPU is around 20-30 deg C.
    I think the crashes that are steam related are due to the fact the Razer mouse has no drivers yet. Those are to be released this month according to Razer's Support Site. It was originally December, which is why I put Windows 8 on at that time.
      My System SpecsSystem Spec

  5. #5

    Tropical Island Pair a Dice
    Posts : 3,030
    Windows 8.1 Pro x64/ Windows 7 Ult x64

    We all need to be able to see your System Specs without downloading a file.
    Enter them in the 'My System Specs' drop box at the lower left of any of your posts.

    Did you check the current SSD firmware?
    It may already be up to date.

    You need to remove the Razor mouse, drivers and any software. They have a long history of causing problems.
    Use a non-Razor mouse for testing purposes.
    You can try it again when you get the new driver.
      My System SpecsSystem Spec

BSOD issues cont.

Similar Threads
Thread Forum
Internet Explorer blocking out-of-date ActiveX control
Windows 8 News
BSOD issues on Windows 8 Pro
I would've put the whole thing onto the subject, but there isn't enough space for that. But the short version is that I've been having BSOD issues on the aforementioned OS. These actually happened a while back after first getting a license for it, but a reset seemed to clear things up until...
BSOD Crashes and Debugging
Facebook app forcing me to click cont when clicking link
I know this might be trivial for some, but it is important to me. So thanks in advance for any replies received. When I am in the facebook win 8 app, normally when I click on a link it will open the IE snap browser window with the website in it on the right side of my monitor. Now whenever I...
Software and Apps
BSOD Issues
Hey, started running into issues on my laptop a few days ago and today started getting hit by BSOD while playing a steam game. Restarted my computer and started doing some research and got hit again. I've attached a copy of my sf report. Thanks in advance for any help.
BSOD Crashes and Debugging
Need Help with BSOD-issues
Dear forum community, I'm having problems with BSOD. It mostly occurs when I'm doing memory intensive stuff such as playing Civ5 or importing/exporting images through lightroom. Any help would be much appreciated! Nik
BSOD Crashes and Debugging
BSOD Issues
I have had my computer crash twice with the new BSOD running Windows 8. I just finished re-imaging this computer as it was crashing before, sure enough I'm still having issues. Can anyone help? I think it may be hardware related. Dell Inspiron 1720 Windows 8 Pro 64 bit 4 GB Ram Intel Core...
BSOD Crashes and Debugging
New BSOD issues
I installed Windows 8 recently and was have DPC Watchdog Violation BSOD issues. I posted to this forum and was told to update my JMicron Raid controller drivers. I did this, and my issues were solved, at least for several days. However, this morning, my computer started having several BSOD...
BSOD Crashes and Debugging

Eight Forums Android App Eight Forums IOS App Follow us on Facebook